S-80824CNY-Z2-U
Product Overview
Category
S-80824CNY-Z2-U belongs to the category of voltage detectors.
Use
This product is used for detecting and monitoring voltage levels in electronic circuits.
Characteristics
- High accuracy voltage detection
- Low power consumption
- Wide operating voltage range
- Compact package size
- RoHS compliant
Package
The S-80824CNY-Z2-U comes in a small surface-mount package, making it suitable for space-constrained applications.
Essence
The essence of this product lies in its ability to accurately detect voltage levels and provide reliable monitoring in various electronic circuits.
Packaging/Quantity
The S-80824CNY-Z2-U is typically packaged in reels containing 3000 units per reel.
Specifications
- Operating Voltage Range: 1.6V to 6.0V
- Detection Voltage Accuracy: ±1.5%
- Quiescent Current: 1.0μA (typ.)
- Output Configuration: N-channel open drain
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-80824CNY-Z2-U has the following pin configuration:
- VDD: Power supply input
- GND: Ground reference
- OUT: Output pin for voltage detection
Functional Features
- Accurate voltage detection within the specified range
- Open-drain output allows easy integration with other circuitry
- Low quiescent current ensures minimal power consumption
- Wide operating temperature range enables usage in various environments
Advantages and Disadvantages
Advantages
- High accuracy voltage detection
- Low power consumption
- Compact package size
- Wide operating voltage range
Disadvantages
- Limited detection voltage range (1.6V to 6.0V)
Working Principles
The S-80824CNY-Z2-U operates based on a built-in voltage reference and comparator circuit. It compares the input voltage with a preset threshold and generates an output signal accordingly.
Detailed Application Field Plans
The S-80824CNY-Z2-U finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Power management systems - Consumer electronics - Industrial control systems
Detailed and Complete Alternative Models
- S-80824ANY-Z2-U: Similar specifications, different package size
- S-80824BNY-Z2-U: Higher detection voltage range, otherwise similar specifications
- S-80824CNY-Z3-U: Lower quiescent current, otherwise similar specifications
These alternative models provide flexibility in choosing the most suitable voltage detector for specific application requirements.
In conclusion, the S-80824CNY-Z2-U is a highly accurate voltage detector with low power consumption and a compact package size. Its wide operating voltage range makes it suitable for various electronic circuits. However, it has a limited detection voltage range. The product operates based on a built-in voltage reference and comparator circuit, enabling reliable voltage monitoring. It finds applications in battery-powered devices, power management systems, consumer electronics, and industrial control systems. Alternative models with different specifications are available to cater to specific needs.
Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa S-80824CNY-Z2-U katika suluhu za kiufundi
Sure! Here are 10 common questions and answers related to the application of S-80824CNY-Z2-U in technical solutions:
1. What is S-80824CNY-Z2-U? - S-80824CNY-Z2-U is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in various technical solutions to monitor and detect voltage levels.
2. What is the operating voltage range of S-80824CNY-Z2-U? - The operating voltage range of S-80824CNY-Z2-U is typically between 1.6V and 6.0V.
3. How does S-80824CNY-Z2-U work? - S-80824CNY-Z2-U works by continuously monitoring the input voltage and comparing it with a reference voltage. If the input voltage falls below or exceeds the specified threshold, the output of the IC changes state, indicating a voltage detection event.
4. What is the output configuration of S-80824CNY-Z2-U? - S-80824CNY-Z2-U has an open-drain output configuration, which means that it can sink current but cannot source current. This type of output requires an external pull-up resistor to provide a logic high level when the output is not active.
5. What is the typical quiescent current consumption of S-80824CNY-Z2-U? - The typical quiescent current consumption of S-80824CNY-Z2-U is very low, usually around a few microamps, making it suitable for battery-powered applications.
6. Can S-80824CNY-Z2-U be used for overvoltage protection? - No, S-80824CNY-Z2-U is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
7. What is the response time of S-80824CNY-Z2-U? - The response time of S-80824CNY-Z2-U is typically very fast, usually in the range of a few microseconds, ensuring quick detection and response to voltage changes.
8. Can S-80824CNY-Z2-U be used in automotive applications? - Yes, S-80824CNY-Z2-U is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
9. Does S-80824CNY-Z2-U have built-in hysteresis? - Yes, S-80824CNY-Z2-U incorporates built-in hysteresis, which helps prevent output oscillation near the threshold voltage and ensures stable voltage detection.
10. Can multiple S-80824CNY-Z2-U ICs be connected in parallel? - Yes, multiple S-80824CNY-Z2-U ICs can be connected in parallel to monitor different voltage levels simultaneously. However, each IC should have its own pull-up resistor to avoid conflicts in the output configuration.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of S-80824CNY-Z2-U.