ABLIC U.S.A. Inc.
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
S-80844CLY-B2-U
Tazama Maelezo DataSheets

S-80844CLY-B2-U

Product Overview

Category

S-80844CLY-B2-U belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a voltage detector in various electronic devices.

Characteristics

  • Low power consumption
  • Wide operating voltage range
  • High accuracy
  • Compact size

Package

The S-80844CLY-B2-U is available in a small surface mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to accurately detect and monitor voltage levels in electronic circuits.

Packaging/Quantity

The S-80844CLY-B2-U is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Operating Voltage Range: 1.6V to 6.0V
  • Detection Voltage Accuracy: ±1.5%
  • Quiescent Current: 1μA (typical)
  • Output Configuration: Open-drain
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-80844CLY-B2-U has the following pin configuration:

  1. VDD (Power Supply)
  2. GND (Ground)
  3. OUT (Output)

Functional Features

  • Undervoltage detection: The IC monitors the input voltage and provides an output signal when it falls below a certain threshold.
  • Open-drain output: The open-drain configuration allows for flexibility in connecting external components.
  • Low power consumption: The IC operates with minimal power consumption, making it suitable for battery-powered devices.
  • Wide operating voltage range: The IC can operate within a wide range of input voltages, providing versatility in different applications.

Advantages and Disadvantages

Advantages

  • Accurate voltage detection
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Disadvantages

  • Limited output configuration options
  • Not suitable for high-voltage applications

Working Principles

The S-80844CLY-B2-U operates based on a voltage divider network and a comparator. It compares the input voltage with a reference voltage and triggers the output when the input voltage falls below the detection threshold.

Detailed Application Field Plans

The S-80844CLY-B2-U can be used in various applications, including: 1. Battery-powered devices: To monitor battery voltage and prevent over-discharge. 2. Power supply units: To detect undervoltage conditions and trigger appropriate actions. 3. Industrial control systems: To monitor voltage levels in critical circuits and ensure proper operation.

Detailed and Complete Alternative Models

  1. S-80845CLY-B2-T: Similar to S-80844CLY-B2-U but with a different detection voltage accuracy.
  2. S-80846CLY-B2-U: Similar to S-80844CLY-B2-U but with a wider operating temperature range.
  3. S-80847CLY-B2-U: Similar to S-80844CLY-B2-U but with a higher operating voltage range.

These alternative models provide similar functionality with slight variations to cater to specific requirements.

Word count: 411 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa S-80844CLY-B2-U katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of S-80844CLY-B2-U in technical solutions:

1. What is S-80844CLY-B2-U? - S-80844CLY-B2-U is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in various technical solutions to monitor and detect voltage levels.

2. What is the operating voltage range of S-80844CLY-B2-U? - The operating voltage range of S-80844CLY-B2-U is typically between X volts and Y volts. Please refer to the datasheet for the exact specifications.

3. How does S-80844CLY-B2-U work? - S-80844CLY-B2-U works by continuously monitoring the input voltage and comparing it with a reference voltage. When the input voltage exceeds or falls below a certain threshold, the output of the IC changes state, indicating the detection of overvoltage or undervoltage conditions.

4. What are the typical applications of S-80844CLY-B2-U? - S-80844CLY-B2-U is commonly used in power supply systems, battery management circuits, industrial equipment, consumer electronics, and other applications where voltage monitoring and protection are required.

5. What is the output configuration of S-80844CLY-B2-U? - S-80844CLY-B2-U has an open-drain output configuration, which means that it can sink current when the output is active but cannot source current.

6. Can S-80844CLY-B2-U be used for both overvoltage and undervoltage detection? - Yes, S-80844CLY-B2-U can be configured to detect both overvoltage and undervoltage conditions by setting the appropriate threshold voltages.

7. What is the accuracy of voltage detection with S-80844CLY-B2-U? - The accuracy of voltage detection with S-80844CLY-B2-U is typically within a certain percentage of the reference voltage. Please refer to the datasheet for the exact specifications.

8. Can S-80844CLY-B2-U be used in automotive applications? - Yes, S-80844CLY-B2-U is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.

9. Does S-80844CLY-B2-U have any built-in protection features? - Yes, S-80844CLY-B2-U has built-in protection features such as overcurrent protection and thermal shutdown to ensure safe operation.

10. How can I interface S-80844CLY-B2-U with a microcontroller or other digital devices? - S-80844CLY-B2-U has an open-drain output, so you can connect it to a microcontroller or other digital devices by using a pull-up resistor and monitoring the state of the output pin.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult the manufacturer for detailed information.