Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
MF-R110-0-99

MF-R110-0-99

Product Overview

Category

The MF-R110-0-99 belongs to the category of resettable fuses, also known as PTC (positive temperature coefficient) thermistors.

Use

These resettable fuses are used to protect electrical circuits from overcurrent and short circuit conditions. They provide a self-recovery feature, making them suitable for applications where frequent power cycling may occur.

Characteristics

  • Resettable: The MF-R110-0-99 can return to its normal state after the fault condition is removed.
  • Current Limiting: It limits the amount of current that can flow through a circuit.
  • Compact Package: The fuse comes in a small and space-saving package, suitable for various electronic devices.
  • Essence: The essence of this product lies in its ability to protect sensitive electronic components from damage due to overcurrent events.

Packaging/Quantity

The MF-R110-0-99 is typically packaged in reels or trays, with quantities varying based on customer requirements.

Specifications

  • Hold Current: 1.1A
  • Trip Current: 2.2A
  • Voltage Rating: 30V
  • Operating Temperature Range: -40°C to 85°C
  • Maximum Time-to-Trip: 60 seconds at 25°C

Detailed Pin Configuration

The MF-R110-0-99 features two terminals for connection within a circuit. The pin configuration is as follows: - Pin 1: Connection terminal 1 - Pin 2: Connection terminal 2

Functional Features

  • Self-Recovery: After the fault condition is removed, the fuse resets itself, eliminating the need for manual replacement.
  • Overcurrent Protection: Provides protection against excessive current flow, safeguarding the circuit and connected components.
  • Fast Response: Quickly reacts to overcurrent events, minimizing the risk of damage to the circuit.

Advantages and Disadvantages

Advantages

  • Self-recovery feature reduces maintenance and replacement costs.
  • Compact size allows for integration into space-constrained designs.
  • Provides reliable overcurrent protection for sensitive electronics.

Disadvantages

  • Limited trip current range compared to traditional fuses.
  • May have a higher initial cost compared to non-resettable fuses.

Working Principles

The MF-R110-0-99 operates based on the principle of PTC thermistor behavior. When exposed to overcurrent conditions, the thermistor's resistance increases, limiting the current flow through the circuit. Once the fault is removed, the thermistor cools down and returns to its low-resistance state, allowing normal operation to resume.

Detailed Application Field Plans

The MF-R110-0-99 is commonly used in various electronic devices and systems, including: - Consumer electronics - Power supplies - Battery packs - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • MF-R160-0-99
  • MF-R200-0-99
  • MF-R250-0-99
  • MF-R500-0-99

In summary, the MF-R110-0-99 resettable fuse offers compact, self-recovering overcurrent protection for a wide range of electronic applications, making it an essential component in modern circuit design.

Word Count: 511

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa MF-R110-0-99 katika suluhu za kiufundi

  1. What is MF-R110-0-99?

    • MF-R110-0-99 is a type of resettable fuse, also known as a PTC (positive temperature coefficient) thermistor, commonly used in electronic circuits for overcurrent protection.
  2. What are the typical applications of MF-R110-0-99?

    • It is commonly used in battery packs, power supplies, and various electronic devices to protect against overcurrent conditions.
  3. How does MF-R110-0-99 work?

    • When an overcurrent condition occurs, the resistance of the MF-R110-0-99 increases significantly, limiting the current flow and protecting the circuit from damage. Once the fault is removed, the device resets itself.
  4. What is the maximum voltage and current rating of MF-R110-0-99?

    • The maximum voltage rating is typically around 30V, and the maximum current rating is approximately 1.1A.
  5. Can MF-R110-0-99 be used in automotive applications?

    • Yes, it can be used in automotive applications where overcurrent protection is required, such as in vehicle electronics and control systems.
  6. Is MF-R110-0-99 suitable for high-temperature environments?

    • Yes, MF-R110-0-99 is designed to operate effectively in high-temperature environments, making it suitable for a wide range of applications.
  7. What are the advantages of using MF-R110-0-99 over traditional fuses?

    • MF-R110-0-99 offers the advantage of being resettable, eliminating the need for replacement after a fault is cleared. It also provides faster response times compared to traditional fuses.
  8. Are there any limitations to using MF-R110-0-99?

    • While MF-R110-0-99 is effective for many applications, it may not be suitable for extremely high-current or high-voltage scenarios, where other types of protection devices may be more appropriate.
  9. Can MF-R110-0-99 be used in conjunction with other protective devices?

    • Yes, it can be used in combination with other protective devices to provide comprehensive overcurrent protection in complex electronic systems.
  10. Where can I purchase MF-R110-0-99 for my technical solution?

    • MF-R110-0-99 can be purchased from electronic component distributors, online retailers, or directly from manufacturers specializing in circuit protection components.