Cantherm
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
MF52F333F3470
Tazama Maelezo DataSheets

MF52F333F3470 Product Overview

Introduction

The MF52F333F3470 is a temperature sensor belonging to the category of NTC (Negative Temperature Coefficient) thermistors. This versatile component is widely used in various electronic applications due to its unique characteristics and reliable performance.

Basic Information Overview

  • Category: NTC Thermistor
  • Use: Temperature sensing and control
  • Characteristics: High sensitivity, small size, fast response time
  • Package: Radial lead type
  • Essence: Reliable temperature measurement and control
  • Packaging/Quantity: Available in bulk packaging with varying quantities

Specifications

  • Resistance at 25°C: 33Ω ±1%
  • B Value: 3470K ±1%
  • Operating Temperature Range: -55°C to 125°C
  • Maximum Power Dissipation: 450mW
  • Thermal Time Constant: 7s (in still air)

Detailed Pin Configuration

The MF52F333F3470 features a standard radial lead configuration with two leads for easy integration into circuit designs.

Functional Features

  • High sensitivity to temperature changes
  • Fast response time for real-time temperature monitoring
  • Wide operating temperature range for diverse applications
  • Accurate and reliable performance in extreme conditions

Advantages and Disadvantages

Advantages

  • Small size allows for compact designs
  • High sensitivity enables precise temperature control
  • Wide operating temperature range suits various environments

Disadvantages

  • Limited power dissipation capacity compared to some alternatives
  • Sensitivity to external factors such as humidity and vibration

Working Principles

The MF52F333F3470 operates based on the principle of NTC thermistors, where its resistance decreases as the temperature increases. This change in resistance is utilized to measure and control the temperature in electronic systems.

Detailed Application Field Plans

The MF52F333F3470 finds extensive use in: - Temperature monitoring and control in industrial equipment - Thermal management in consumer electronics - Automotive climate control systems - Medical devices for temperature-sensitive applications

Detailed and Complete Alternative Models

  • MF52A103J3470: Similar NTC thermistor with higher resistance at 25°C
  • MF52E473F3470: NTC thermistor with a wider operating temperature range

In conclusion, the MF52F333F3470 NTC thermistor offers reliable temperature sensing and control capabilities, making it an essential component in various electronic applications.

[Word Count: 330]

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa MF52F333F3470 katika suluhu za kiufundi

  1. What is the operating temperature range of MF52F333F3470?

    • The operating temperature range of MF52F333F3470 is typically -55°C to +125°C.

  2. What is the resistance tolerance of MF52F333F3470?

    • The resistance tolerance of MF52F333F3470 is ±1% or ±2%.

  3. Can MF52F333F3470 be used in automotive applications?

    • Yes, MF52F333F3470 is suitable for automotive applications due to its wide operating temperature range and reliability.

  4. What are the typical applications of MF52F333F3470 in technical solutions?

    • MF52F333F3470 is commonly used in temperature sensing, control systems, power supplies, and industrial equipment.

  5. Is MF52F333F3470 suitable for high-precision temperature measurement?

    • Yes, MF52F333F3470 is suitable for high-precision temperature measurement due to its low drift and high accuracy.

  6. Does MF52F333F3470 require any special handling during assembly?

    • MF52F333F3470 does not require special handling during assembly, but it should be handled with care to avoid damage to the sensor.

  7. What is the thermal time constant of MF52F333F3470?

    • The thermal time constant of MF52F333F3470 is typically around 10-15 seconds in still air.

  8. Can MF52F333F3470 be used in moisture-prone environments?

    • MF52F333F3470 has good moisture resistance and can be used in moderately moisture-prone environments.

  9. What is the recommended soldering profile for MF52F333F3470?

    • The recommended soldering profile for MF52F333F3470 includes a peak temperature of 260°C for up to 10 seconds.

  10. Are there any specific precautions to consider when designing with MF52F333F3470?

    • Designers should ensure proper thermal management and avoid excessive mechanical stress on the sensor to maintain its performance and reliability.