Diodes Incorporated
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
SBL1635CT
Tazama Maelezo DataSheets

SBL1635CT

Introduction

The SBL1635CT is a Schottky Barrier Rectifier designed for high-frequency DC-DC converters, freewheeling diodes, and polarity protection applications. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Schottky Barrier Rectifier
  • Use: High-frequency DC-DC converters, freewheeling diodes, polarity protection
  • Characteristics: Fast switching, low forward voltage drop, high reliability
  • Package: TO-220AB
  • Essence: Silicon Schottky Diode
  • Packaging/Quantity: Tape & Reel (800 units per reel)

Specifications

  • Voltage - DC Reverse (Vr) (Max): 35V
  • Current - Average Rectified (Io): 16A
  • Voltage - Forward (Vf) (Max) @ If: 490mV @ 8A
  • Speed: Fast Recovery =< 500ns, > 200mA (Io)
  • Operating Temperature: -65°C ~ 175°C

Detailed Pin Configuration

The SBL1635CT has a standard TO-220AB package with three pins: 1. Anode 2. Cathode 3. Not connected (Tab)

Functional Features

  • Fast switching speed
  • Low forward voltage drop
  • High reliability and rugged design
  • Suitable for high-frequency applications

Advantages and Disadvantages

Advantages

  • Efficient energy conversion
  • Reduced power loss
  • Compact design
  • High temperature operation

Disadvantages

  • Higher cost compared to standard rectifiers
  • Limited reverse voltage rating

Working Principles

The SBL1635CT operates based on the Schottky barrier principle, where a metal-semiconductor junction is formed, resulting in fast switching and low forward voltage drop characteristics. When a forward bias is applied, the diode conducts current with minimal voltage drop, making it suitable for high-frequency applications.

Detailed Application Field Plans

The SBL1635CT is widely used in various applications, including: - High-frequency DC-DC converters - Freewheeling diodes in power supplies - Polarity protection in electronic circuits

Detailed and Complete Alternative Models

  • SBL1630CT: 30V, 16A, TO-220AB package
  • SBL1640CT: 40V, 16A, TO-220AB package
  • SBL1660CT: 60V, 16A, TO-220AB package

In conclusion, the SBL1635CT Schottky Barrier Rectifier offers efficient energy conversion, fast switching, and high reliability, making it suitable for various high-frequency applications. While it has advantages such as reduced power loss and compact design, it also has limitations in terms of cost and reverse voltage rating. Understanding its specifications, pin configuration, functional features, and application field plans can aid in effectively utilizing this component in electronic designs.

[Word Count: 443]

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa SBL1635CT katika suluhu za kiufundi

  1. What is SBL1635CT?

    • SBL1635CT is a Schottky barrier rectifier diode designed for high current density applications.

  2. What are the key features of SBL1635CT?

    • The key features include low forward voltage drop, high current capability, and fast switching speed.

  3. What are the typical applications of SBL1635CT?

    • SBL1635CT is commonly used in power supplies, converters, inverters, and freewheeling diodes for high-frequency and high-current applications.

  4. What is the maximum forward voltage of SBL1635CT?

    • The maximum forward voltage is typically around 0.65V at a forward current of 16A.

  5. What is the reverse recovery time of SBL1635CT?

    • The reverse recovery time is typically around 20ns, making it suitable for high-speed switching applications.

  6. What is the maximum junction temperature of SBL1635CT?

    • The maximum junction temperature is typically 150°C, ensuring reliable performance under high-temperature conditions.

  7. Does SBL1635CT require a heatsink for operation?

    • Yes, for high current applications or when operating at elevated temperatures, a heatsink may be necessary to maintain optimal performance and reliability.

  8. Is SBL1635CT RoHS compliant?

    • Yes, SBL1635CT is RoHS compliant, meeting environmental standards for lead-free manufacturing.

  9. Can SBL1635CT be used in parallel for higher current applications?

    • Yes, SBL1635CT can be used in parallel to increase the current handling capability in high-power applications.

  10. Where can I find detailed technical specifications and application notes for SBL1635CT?

    • Detailed technical specifications and application notes for SBL1635CT can be found in the product datasheet provided by the manufacturer or distributor.