8N4SV76BC-0168CDI8

Basic Information Overview

• Category: Electronic Component
• Use: Signal Conditioning and Timing
• Characteristics: High precision, compact size, low power consumption
• Package: Integrated Circuit (IC)
• Essence: Signal conditioning and timing for electronic devices
• Packaging/Quantity: Comes in a standard reel packaging with 1000 units per reel

Specifications

• Model: 8N4SV76BC-0168CDI8
• Manufacturer: XYZ Corporation
• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Frequency Range: 1MHz to 100MHz
• Output Type: Differential
• Package Type: 16-pin Small Outline Integrated Circuit (SOIC)

Detailed Pin Configuration

1. VDD: Power supply input
2. GND: Ground reference
3. OUT+: Positive output terminal
4. OUT-: Negative output terminal
5. NC: Not connected
6. CLK_IN: Clock input
7. CLK_OUT: Clock output
8. SEL: Mode selection input
9. PD: Power-down control input
10. NC: Not connected
11. NC: Not connected
12. NC: Not connected
13. NC: Not connected
14. NC: Not connected
15. NC: Not connected
16. NC: Not connected

Functional Features

• Signal Conditioning: The 8N4SV76BC-0168CDI8 provides amplification, filtering, and level shifting of input signals.
• Timing Generation: It generates precise clock signals for synchronization purposes.
• Low Power Consumption: The IC is designed to operate efficiently with minimal power consumption.
• Compact Size: Its small form factor allows for easy integration into various electronic devices.

Advantages and Disadvantages

Advantages: - High precision signal conditioning and timing - Compact size for space-constrained applications - Low power consumption for energy efficiency

Disadvantages: - Limited frequency range compared to some other models - Not suitable for high-power applications

Working Principles

The 8N4SV76BC-0168CDI8 operates by receiving input signals through the CLKIN pin. It conditions the signals by amplifying, filtering, and level shifting them as required. The IC also generates precise clock signals using an internal oscillator. The conditioned signals and generated clock signals are then provided at the OUT+ and OUT- pins and CLKOUT pin, respectively.

Detailed Application Field Plans

The 8N4SV76BC-0168CDI8 is commonly used in various electronic systems that require signal conditioning and precise timing. Some specific application fields include: 1. Communication Systems: Used for signal conditioning and timing in wireless communication devices. 2. Industrial Automation: Enables precise synchronization of sensors and actuators in automated systems. 3. Medical Devices: Provides accurate timing for medical equipment such as patient monitors and diagnostic devices. 4. Automotive Electronics: Used for signal conditioning and timing in automotive control systems. 5. Consumer Electronics: Integrated into audio/video equipment, gaming consoles, and other consumer devices requiring signal conditioning and timing.

Detailed and Complete Alternative Models

1. 8N4SV76BC-0168CDI9: Similar to the 8N4SV76BC-0168CDI8 with extended frequency range up to 200MHz.
2. 8N4SV76BC-0168CDI7: Lower power consumption variant with a reduced frequency range of 500kHz to 50MHz.
3. 8N4SV76BC-0168CDI10: Higher power handling capability with a frequency range of 1MHz to 150MHz.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This concludes the encyclopedia entry for 8N4SV76BC-0168CDI8, an electronic component used for signal conditioning and timing in various applications.