Infineon Technologies
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
BSS169L6327HTSA1
Tazama Maelezo DataSheets

BSS169L6327HTSA1

Product Overview

Category

The BSS169L6327HTSA1 belongs to the category of small signal field-effect transistors (FETs).

Use

It is commonly used for amplification and switching of low-power electronic signals in various applications.

Characteristics

  • Low power consumption
  • High input impedance
  • Fast switching speed
  • Small package size

Package

The BSS169L6327HTSA1 is typically available in a surface-mount SOT-23 package.

Essence

This FET is essential for low-power signal amplification and switching in electronic circuits.

Packaging/Quantity

It is usually supplied in reels with a quantity of 3000 units per reel.

Specifications

  • Drain-Source Voltage (VDS): 100V
  • Continuous Drain Current (ID): 250mA
  • Total Power Dissipation (PD): 360mW
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The BSS169L6327HTSA1 has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • Low input capacitance
  • High gain
  • Low noise figure
  • High linearity

Advantages

  • Small form factor
  • Low power consumption
  • Suitable for low-power applications
  • Fast switching speed

Disadvantages

  • Limited maximum voltage and current ratings
  • Sensitive to electrostatic discharge (ESD)

Working Principles

The BSS169L6327HTSA1 operates based on the principles of field-effect transistors, where the control of current flow between the source and drain terminals is achieved by varying the voltage applied to the gate terminal.

Detailed Application Field Plans

This FET is widely used in: - Audio amplifiers - Signal processing circuits - Low-power switching applications - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the BSS169L6327HTSA1 include: - 2N7002 - BS170 - IRF530

In conclusion, the BSS169L6327HTSA1 is a small signal FET with characteristics suitable for low-power amplification and switching applications. Its compact size and low power consumption make it an ideal choice for various electronic circuits.

[Word Count: 306]

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa BSS169L6327HTSA1 katika suluhu za kiufundi

  1. What is BSS169L6327HTSA1?

    • BSS169L6327HTSA1 is a N-channel enhancement mode field-effect transistor (FET) designed for low voltage applications.

  2. What are the key features of BSS169L6327HTSA1?

    • The key features include low threshold voltage, low on-resistance, and high-speed switching capabilities.

  3. What are the typical applications of BSS169L6327HTSA1?

    • Typical applications include power management in portable devices, battery management systems, and load switching in various electronic circuits.

  4. What is the maximum drain-source voltage rating of BSS169L6327HTSA1?

    • The maximum drain-source voltage rating is typically around 60V.

  5. What is the maximum continuous drain current of BSS169L6327HTSA1?

    • The maximum continuous drain current is typically around 220mA.

  6. What is the typical input capacitance of BSS169L6327HTSA1?

    • The typical input capacitance is around 50pF.

  7. What is the operating temperature range of BSS169L6327HTSA1?

    • The operating temperature range is typically from -55°C to 150°C.

  8. Can BSS169L6327HTSA1 be used in automotive applications?

    • Yes, it is suitable for use in automotive applications where low voltage and high efficiency are required.

  9. Does BSS169L6327HTSA1 require external protection circuitry?

    • It may require external protection circuitry depending on the specific application and operating conditions.

  10. Where can I find detailed technical specifications and application notes for BSS169L6327HTSA1?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.