IXFH10N90
Product Overview
- Category: Power MOSFET
- Use: High-voltage applications
- Characteristics: High power handling, low on-resistance, fast switching speed
- Package: TO-247
- Essence: Power management
- Packaging/Quantity: Typically sold in reels of 50 or 100 units
Specifications
- Voltage Rating: 900V
- Current Rating: 10A
- On-Resistance: 0.65 Ohms
- Gate Charge: 40nC
- Operating Temperature: -55°C to 150°C
Detailed Pin Configuration
The IXFH10N90 follows the standard pin configuration for a TO-247 package: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage capability
- Low gate charge
- Fast switching speed
- Low on-resistance
Advantages and Disadvantages
Advantages: - Suitable for high-power applications - Low conduction losses - Fast switching times
Disadvantages: - Higher cost compared to lower voltage MOSFETs - Requires careful consideration of drive circuitry due to high gate charge
Working Principles
The IXFH10N90 operates based on the principles of field-effect transistors, utilizing the voltage applied to the gate terminal to control the flow of current between the drain and source terminals.
Detailed Application Field Plans
The IXFH10N90 is well-suited for use in various high-voltage applications such as: - Switched-mode power supplies - Motor drives - Inverters - Welding equipment - Inductive heating systems
Detailed and Complete Alternative Models
IXFH12N90
- Voltage Rating: 900V
- Current Rating: 12A
- On-Resistance: 0.5 Ohms
- Package: TO-247
IXFH15N90
- Voltage Rating: 900V
- Current Rating: 15A
- On-Resistance: 0.4 Ohms
- Package: TO-247
IXFH20N90
- Voltage Rating: 900V
- Current Rating: 20A
- On-Resistance: 0.3 Ohms
- Package: TO-247
This completes the entry for IXFH10N90, providing comprehensive information about its product details, specifications, features, and applications.
Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa IXFH10N90 katika suluhu za kiufundi
What is IXFH10N90?
- IXFH10N90 is a high voltage MOSFET designed for various technical solutions requiring high power and efficiency.
What are the key specifications of IXFH10N90?
- The key specifications include a voltage rating of 900V, a continuous drain current of 10A, and a low on-resistance for efficient power handling.
In what applications can IXFH10N90 be used?
- IXFH10N90 is commonly used in applications such as power supplies, motor control, inverters, and welding equipment.
What are the advantages of using IXFH10N90 in technical solutions?
- The advantages include high voltage capability, low on-resistance, fast switching speed, and ruggedness for reliable performance in demanding applications.
How does IXFH10N90 contribute to energy efficiency in technical solutions?
- IXFH10N90's low on-resistance and high voltage capability help minimize power losses, leading to improved energy efficiency in various systems.
What are the thermal considerations when using IXFH10N90?
- Proper heat sinking and thermal management are important to ensure that IXFH10N90 operates within its temperature limits for optimal performance and reliability.
Can IXFH10N90 be used in parallel configurations for higher current applications?
- Yes, IXFH10N90 can be used in parallel to increase the current-handling capability in high-power applications.
Are there any specific driver requirements for IXFH10N90?
- It is recommended to use a gate driver with appropriate voltage and current capabilities to fully utilize the performance of IXFH10N90.
What protection features does IXFH10N90 offer for circuit safety?
- IXFH10N90 provides built-in protection against overcurrent, overvoltage, and overtemperature conditions to safeguard the circuit and the device itself.
Where can I find detailed application notes and reference designs for using IXFH10N90 in technical solutions?
- Detailed application notes and reference designs for IXFH10N90 can be found on the manufacturer's website or through authorized distributors.