Maxim Integrated
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
DS1845E-050+T&R
Tazama Maelezo DataSheets

DS1845E-050+T&R

Product Overview

Category

The DS1845E-050+T&R belongs to the category of electronic components.

Use

This product is commonly used in various electronic devices and systems for controlling and adjusting parameters.

Characteristics

  • The DS1845E-050+T&R is a digital potentiometer with non-volatile memory.
  • It offers precise resistance adjustment capabilities.
  • The device operates within a wide temperature range, making it suitable for various environments.
  • It has low power consumption, ensuring energy efficiency.
  • The DS1845E-050+T&R provides reliable performance and durability.

Package

The DS1845E-050+T&R is available in a compact surface-mount package.

Essence

The essence of this product lies in its ability to replace traditional mechanical potentiometers with a more advanced and versatile electronic solution.

Packaging/Quantity

The DS1845E-050+T&R is typically packaged in reels or tape and reel packaging, with a quantity of 250 units per reel.

Specifications

  • Resistance Range: 0Ω to 50kΩ
  • Resolution: 256 steps
  • Supply Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: I2C-compatible

Detailed Pin Configuration

The DS1845E-050+T&R features the following pin configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. SDA: Serial data line (I2C)
  4. SCL: Serial clock line (I2C)
  5. A0: Address selection bit 0
  6. A1: Address selection bit 1
  7. WP: Write protect input
  8. H: Terminal for high resistance
  9. W: Terminal for wiper (adjustable resistance)
  10. L: Terminal for low resistance

Functional Features

  • Non-volatile memory: The DS1845E-050+T&R retains its settings even when power is removed.
  • Digital control: The potentiometer can be adjusted digitally, allowing for precise and repeatable settings.
  • I2C interface: The device can be easily controlled and programmed using the I2C communication protocol.
  • Low power consumption: The DS1845E-050+T&R minimizes energy usage, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

  • Precise resistance adjustment
  • Non-volatile memory for retaining settings
  • Compact and surface-mount package
  • Wide temperature range operation
  • Low power consumption

Disadvantages

  • Limited resistance range compared to some other potentiometers
  • Requires I2C interface for control

Working Principles

The DS1845E-050+T&R utilizes digital potentiometer technology to adjust resistance electronically. It consists of a series of resistive elements connected in a ladder configuration. By changing the position of the wiper terminal, the effective resistance between the high and low terminals can be varied digitally.

Detailed Application Field Plans

The DS1845E-050+T&R finds applications in various fields, including:

  1. Audio equipment: Used for volume control and tone adjustment.
  2. Industrial automation: Employed in control systems for precise parameter adjustments.
  3. Test and measurement instruments: Integrated into devices requiring accurate resistance settings.
  4. Automotive electronics: Utilized in vehicle systems for calibration and control purposes.
  5. Consumer electronics: Incorporated into electronic devices for user-adjustable settings.

Detailed and Complete Alternative Models

  1. DS1804Z-100+: Similar digital potentiometer with a higher resistance range of 0Ω to 100kΩ.
  2. DS1868E-010+T&R: Digital potentiometer with dual channels for independent adjustment.
  3. MCP4017T-503E/CH: Alternative digital potentiometer with similar specifications and I2C interface.

Note: The above alternative models are provided as examples and may not cover the entire range of available options.

In conclusion, the DS1845E-050+T&R is a versatile digital potentiometer that offers precise resistance adjustment capabilities in various electronic applications. Its non-volatile memory, compact package, and low power consumption make it an attractive choice for designers seeking reliable and efficient control solutions.

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa DS1845E-050+T&R katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of DS1845E-050+T&R in technical solutions:

  1. Q: What is DS1845E-050+T&R? A: DS1845E-050+T&R is a digital potentiometer IC (integrated circuit) that can be used for various applications in electronic circuits.

  2. Q: What is the purpose of using DS1845E-050+T&R in technical solutions? A: The DS1845E-050+T&R can be used to adjust resistance digitally, replacing traditional mechanical potentiometers in applications where precise resistance control is required.

  3. Q: How does DS1845E-050+T&R work? A: DS1845E-050+T&R uses digital signals to control the resistance value. It consists of a series of resistive elements and switches that can be toggled on or off to achieve the desired resistance.

  4. Q: What are some typical applications of DS1845E-050+T&R? A: DS1845E-050+T&R can be used in audio equipment, instrumentation, industrial control systems, and other electronic devices that require adjustable resistance.

  5. Q: Can DS1845E-050+T&R be controlled by a microcontroller or other digital devices? A: Yes, DS1845E-050+T&R can be easily interfaced with microcontrollers or other digital devices through standard communication protocols like I2C or SPI.

  6. Q: What is the resolution of DS1845E-050+T&R? A: DS1845E-050+T&R has a resolution of 256 steps, meaning it can provide 256 different resistance values between its minimum and maximum limits.

  7. Q: What is the power supply requirement for DS1845E-050+T&R? A: DS1845E-050+T&R typically operates on a voltage supply range of 2.7V to 5.5V.

  8. Q: Can DS1845E-050+T&R withstand high temperatures? A: Yes, DS1845E-050+T&R is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  9. Q: Is DS1845E-050+T&R available in different package options? A: Yes, DS1845E-050+T&R is available in various package options, including T&R (tape and reel) packaging for automated assembly.

  10. Q: Where can I find more information about DS1845E-050+T&R and its application notes? A: You can refer to the manufacturer's datasheet and application notes for detailed information on DS1845E-050+T&R and its specific applications.