Maxim Integrated
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
MAX6495ATT+T
Tazama Maelezo DataSheets

MAX6495ATT+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, small package size
  • Package: Thin SOT23-6
  • Essence: Power management solution for various electronic devices
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6495ATT+T has a total of six pins arranged as follows:

  1. GND: Ground pin
  2. EN: Enable pin for turning the regulator on/off
  3. FB: Feedback pin for setting the output voltage
  4. VOUT: Output voltage pin
  5. VIN: Input voltage pin
  6. BYP: Bypass capacitor connection pin

Functional Features

  • Low dropout voltage ensures efficient power conversion even with low input voltages.
  • Wide input voltage range allows compatibility with various power sources.
  • Small package size enables space-saving designs in compact electronic devices.
  • Enable pin provides control over the regulator's operation.
  • Feedback pin allows precise adjustment of the output voltage.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Wide input voltage range - Small package size - Precise output voltage adjustment

Disadvantages: - Limited maximum output current (150mA)

Working Principles

The MAX6495ATT+T is a voltage regulator that converts an input voltage within the range of 2.5V to 5.5V into a regulated output voltage between 1.2V and 3.3V. It achieves this by utilizing an internal control circuit that adjusts the pass transistor's resistance to maintain a stable output voltage despite variations in the input voltage.

Detailed Application Field Plans

The MAX6495ATT+T is commonly used in various electronic devices where efficient power management is crucial. Some application fields include:

  1. Mobile Devices: Smartphones, tablets, portable media players.
  2. Wearable Electronics: Fitness trackers, smartwatches.
  3. IoT Devices: Sensors, wireless modules, home automation systems.
  4. Battery-Powered Devices: Portable gaming consoles, handheld medical devices.

Detailed and Complete Alternative Models

  1. MAX6496ATT+T: Similar specifications with higher maximum output current (300mA).
  2. MAX6497ATT+T: Similar specifications with adjustable output voltage range.
  3. MAX6498ATT+T: Similar specifications with additional thermal shutdown protection.

Note: The above alternative models are from the same MAX6495 series and offer similar functionality with slight variations in features.

This entry provides an overview of the MAX6495ATT+T voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa MAX6495ATT+T katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of MAX6495ATT+T in technical solutions:

  1. Q: What is the MAX6495ATT+T? A: The MAX6495ATT+T is a high-voltage, low-quiescent current linear regulator designed for various technical applications.

  2. Q: What is the input voltage range of the MAX6495ATT+T? A: The MAX6495ATT+T can accept input voltages ranging from 4V to 80V.

  3. Q: What is the output voltage range of the MAX6495ATT+T? A: The MAX6495ATT+T can provide an adjustable output voltage ranging from 1.25V to 60V.

  4. Q: What is the maximum output current of the MAX6495ATT+T? A: The MAX6495ATT+T can deliver a maximum output current of 150mA.

  5. Q: Can the MAX6495ATT+T handle high temperatures? A: Yes, the MAX6495ATT+T is designed to operate over a wide temperature range, typically from -40°C to +125°C.

  6. Q: Does the MAX6495ATT+T have built-in protection features? A: Yes, the MAX6495ATT+T includes features like thermal shutdown, current limit, and reverse-battery protection.

  7. Q: Can I use the MAX6495ATT+T in battery-powered applications? A: Yes, the low quiescent current of the MAX6495ATT+T makes it suitable for battery-powered applications where power efficiency is crucial.

  8. Q: Is the MAX6495ATT+T suitable for automotive applications? A: Yes, the MAX6495ATT+T is automotive-grade and can be used in various automotive applications.

  9. Q: Can I use the MAX6495ATT+T in industrial control systems? A: Absolutely, the MAX6495ATT+T is well-suited for industrial control systems due to its high input voltage range and robust protection features.

  10. Q: Are there any evaluation boards or reference designs available for the MAX6495ATT+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs that can help you quickly prototype and implement the MAX6495ATT+T in your technical solution.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.