Micro Commercial Co
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
30KP216A-TP
Tazama Maelezo DataSheets

30KP216A-TP Product Overview

Introduction

The 30KP216A-TP is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides a comprehensive overview of the 30KP216A-TP, including its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Components
  • Use: Transient Voltage Suppression
  • Characteristics: High Performance, Fast Response Time, Low Clamping Voltage
  • Package: Axial Leaded
  • Essence: Protection of Sensitive Electronic Equipment
  • Packaging/Quantity: Available in Reel or Bulk Packaging

Specifications

  • Peak Pulse Power: 3000W
  • Standoff Voltage: 185V
  • Breakdown Voltage: 205V
  • Maximum Clamping Voltage: 320V
  • Operating Temperature Range: -55°C to +175°C
  • Mounting Type: Through Hole

Detailed Pin Configuration

The 30KP216A-TP TVS diode has an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast response time to transient voltage events
  • High peak pulse power handling capability
  • Low clamping voltage to protect downstream components

Advantages

  • Robust protection against transient voltage events
  • Wide operating temperature range for diverse applications
  • Reliable performance in harsh environments

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of mounting and layout for optimal performance

Working Principles

The 30KP216A-TP operates by diverting excessive transient current away from sensitive electronic circuits, thereby limiting the voltage across the protected device during transient events. This is achieved through the rapid conduction of the TVS diode when the voltage exceeds the breakdown voltage, effectively shunting the excess energy to ground.

Detailed Application Field Plans

The 30KP216A-TP is widely used in various applications, including: - Telecommunication equipment - Industrial automation systems - Power supply units - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • 30KP188CA-TP: Similar characteristics with lower standoff voltage
  • 30KP230A-TP: Higher standoff voltage with comparable performance
  • 30KP250CA-TP: Lower clamping voltage for more sensitive applications

In conclusion, the 30KP216A-TP TVS diode offers robust transient voltage suppression capabilities, making it an essential component for protecting sensitive electronic equipment across diverse industries.

Word Count: 398

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa 30KP216A-TP katika suluhu za kiufundi

Sure, here are 10 common questions and answers related to the application of 30KP216A-TP in technical solutions:

  1. What is the voltage rating of 30KP216A-TP?

    • The voltage rating of 30KP216A-TP is 216V.

  2. What is the maximum peak pulse current it can handle?

    • It can handle a maximum peak pulse current of 30000A.

  3. What are the typical applications for 30KP216A-TP?

    • Typical applications include surge protection in telecommunications equipment, power supplies, and other sensitive electronic devices.

  4. Is 30KP216A-TP suitable for use in outdoor environments?

    • Yes, it is designed for outdoor use and can withstand harsh environmental conditions.

  5. What is the response time of 30KP216A-TP?

    • The response time is very fast, typically less than 1 nanosecond.

  6. Can 30KP216A-TP be used for protecting data lines?

    • Yes, it is suitable for protecting data lines in communication systems and other data transmission equipment.

  7. Does it require any special heat sinking or mounting considerations?

    • It is recommended to use proper heat sinking and mounting techniques to ensure optimal performance.

  8. What is the operating temperature range of 30KP216A-TP?

    • It can operate within a temperature range of -55°C to +175°C.

  9. How does 30KP216A-TP compare to other similar surge protection devices?

    • It offers higher surge current capability and lower clamping voltage compared to many similar devices.

  10. Are there any specific safety precautions to consider when using 30KP216A-TP?

    • Users should follow proper ESD handling procedures and ensure correct polarity during installation to avoid damage to the device.

I hope these questions and answers are helpful for your technical solutions! Let me know if you need further assistance.