Micro Commercial Co
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
P4KE220A-TP
Tazama Maelezo DataSheets

P4KE220A-TP

Product Overview

The P4KE220A-TP belongs to the category of transient voltage suppressor diodes. These diodes are commonly used to protect sensitive electronic components from voltage spikes and transients. The P4KE220A-TP is designed to provide reliable overvoltage protection in various electronic circuits. Its characteristics include high surge capability, fast response time, and low clamping voltage. The diode is typically available in a package that consists of a molded plastic body with axial leads. Each package contains a specified quantity of diodes.

Specifications

  • Part Number: P4KE220A-TP
  • Category: Transient Voltage Suppressor Diode
  • Use: Overvoltage protection in electronic circuits
  • Characteristics: High surge capability, fast response time, low clamping voltage
  • Package: Molded plastic body with axial leads
  • Packaging/Quantity: Specified quantity per package

Detailed Pin Configuration

The P4KE220A-TP diode has an axial lead package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

The P4KE220A-TP diode provides effective protection against voltage transients by diverting excessive current away from sensitive components. It responds rapidly to overvoltage conditions and clamps the voltage to a safe level, preventing damage to the circuit.

Advantages and Disadvantages

Advantages

  • High surge capability
  • Fast response time
  • Low clamping voltage

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection

Working Principles

When an overvoltage condition occurs, the P4KE220A-TP diode conducts excess current to ground, limiting the voltage across the protected circuit. This action helps to prevent damage to sensitive components by effectively suppressing the transient voltage.

Detailed Application Field Plans

The P4KE220A-TP diode is widely used in various electronic applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the P4KE220A-TP diode include: - P4KE6.8A-TP - P4KE10A-TP - P4KE18A-TP - P4KE30A-TP

These alternative models offer similar transient voltage suppression capabilities and can be used as substitutes based on specific application requirements.

In conclusion, the P4KE220A-TP transient voltage suppressor diode is a reliable component for protecting electronic circuits from overvoltage events. Its high surge capability, fast response time, and low clamping voltage make it suitable for a wide range of applications, from power supplies to consumer electronics.

Word count: 411

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa P4KE220A-TP katika suluhu za kiufundi

Sure, here are 10 common questions and answers related to the application of P4KE220A-TP in technical solutions:

  1. What is the maximum peak pulse power dissipation of P4KE220A-TP?

    • The maximum peak pulse power dissipation of P4KE220A-TP is 400 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage of P4KE220A-TP?

    • The breakdown voltage of P4KE220A-TP is 198V to 242V.

  3. What is the typical clamping voltage of P4KE220A-TP?

    • The typical clamping voltage of P4KE220A-TP is 297V at 1A.

  4. What is the maximum reverse leakage current of P4KE220A-TP?

    • The maximum reverse leakage current of P4KE220A-TP is 1μA at 200V.

  5. What is the operating temperature range of P4KE220A-TP?

    • The operating temperature range of P4KE220A-TP is -55°C to +175°C.

  6. What is the package type of P4KE220A-TP?

    • P4KE220A-TP comes in a DO-41 package.

  7. What are the typical applications of P4KE220A-TP?

    • P4KE220A-TP is commonly used in surge protection for sensitive electronics, such as in telecommunications equipment, industrial control systems, and power supplies.

  8. Is P4KE220A-TP RoHS compliant?

    • Yes, P4KE220A-TP is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.

  9. What are the key features of P4KE220A-TP?

    • Some key features of P4KE220A-TP include fast response time, low clamping voltage, and high surge capability.

  10. Can P4KE220A-TP be used for overvoltage protection in automotive applications?

    • Yes, P4KE220A-TP can be used for overvoltage protection in automotive applications, such as in vehicle electronics and onboard systems.

I hope these questions and answers are helpful for your technical solutions involving P4KE220A-TP! If you have any more specific questions, feel free to ask.