Microsemi Corporation
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
MAPLAD7.5KP26AE3
Tazama Maelezo DataSheets

MAPLAD7.5KP26AE3

Introduction

The MAPLAD7.5KP26AE3 belongs to the category of high-power transient voltage suppressor (TVS) diodes. These diodes are designed to protect sensitive electronics from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MAPLAD7.5KP26AE3.

Basic Information Overview

  • Category: High-power transient voltage suppressor diode
  • Use: Protection against voltage transients induced by lightning, ESD, and other transient voltage events
  • Characteristics: High power handling capability, fast response time, low clamping voltage
  • Package: Axial leaded package
  • Essence: Safeguarding sensitive electronics from voltage transients
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Peak Pulse Power: 7.5kW
  • Standoff Voltage: 26V
  • Breakdown Voltage: 28.9V
  • Maximum Clamping Voltage: 45V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The MAPLAD7.5KP26AE3 typically has an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • High power dissipation capability
  • Fast response to transient voltage events
  • Low clamping voltage to protect downstream components

Advantages and Disadvantages

Advantages

  • Effective protection against high-energy transients
  • Fast response time
  • Low clamping voltage

Disadvantages

  • Higher cost compared to lower power TVS diodes
  • Larger physical size due to higher power handling capability

Working Principles

The MAPLAD7.5KP26AE3 operates by diverting excessive transient current away from sensitive electronic components when a voltage transient event occurs. It achieves this by rapidly switching into a low impedance state, effectively clamping the transient voltage to a safe level.

Detailed Application Field Plans

The MAPLAD7.5KP26AE3 is commonly used in applications where protection against high-energy transients is critical. Some of the key application fields include: - Telecommunication equipment - Industrial control systems - Power supplies - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to the MAPLAD7.5KP26AE3 include: - Littelfuse P6KE27A - Vishay 1.5KE30A - ON Semiconductor PTVS24VP1UP

In summary, the MAPLAD7.5KP26AE3 is a high-power transient voltage suppressor diode designed to provide robust protection against voltage transients in various electronic applications.

[Word count: 439]

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa MAPLAD7.5KP26AE3 katika suluhu za kiufundi

  1. What is MAPLAD7.5KP26AE3?

    • MAPLAD7.5KP26AE3 is a high-power transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What is the maximum peak pulse power of MAPLAD7.5KP26AE3?

    • The maximum peak pulse power of MAPLAD7.5KP26AE3 is 7.5 kilowatts.

  3. What is the breakdown voltage of MAPLAD7.5KP26AE3?

    • The breakdown voltage of MAPLAD7.5KP26AE3 is 26 volts.

  4. What are the typical applications of MAPLAD7.5KP26AE3?

    • MAPLAD7.5KP26AE3 is commonly used in surge protection for telecommunications equipment, industrial control systems, power supplies, and other sensitive electronic devices.

  5. What is the response time of MAPLAD7.5KP26AE3?

    • The response time of MAPLAD7.5KP26AE3 is very fast, typically responding within nanoseconds to clamp transient voltages.

  6. Is MAPLAD7.5KP26AE3 suitable for outdoor applications?

    • Yes, MAPLAD7.5KP26AE3 is suitable for outdoor applications due to its ability to withstand lightning-induced transients.

  7. What is the operating temperature range of MAPLAD7.5KP26AE3?

    • The operating temperature range of MAPLAD7.5KP26AE3 is typically between -55°C to +175°C, making it suitable for a wide range of environments.

  8. Does MAPLAD7.5KP26AE3 meet any industry standards?

    • Yes, MAPLAD7.5KP26AE3 is designed to meet industry standards for surge protection and transient voltage suppression.

  9. Can MAPLAD7.5KP26AE3 be used in series or parallel configurations?

    • Yes, MAPLAD7.5KP26AE3 can be used in both series and parallel configurations to provide enhanced protection for different types of equipment.

  10. What are the key advantages of using MAPLAD7.5KP26AE3 in technical solutions?

    • The key advantages of using MAPLAD7.5KP26AE3 include its high power handling capability, fast response time, and reliability in protecting sensitive electronics from transient voltage events.