Microsemi Corporation
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
UPTB33E3/TR7
Tazama Maelezo DataSheets

UPTB33E3/TR7

Product Overview

Category:

The UPTB33E3/TR7 belongs to the category of semiconductor devices.

Use:

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics:

  • Regulates voltage within a specified range
  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection

Package:

The UPTB33E3/TR7 is available in a small surface-mount package.

Essence:

The essence of this product lies in its ability to regulate and stabilize voltage in electronic circuits.

Packaging/Quantity:

It is typically packaged in reels with a specific quantity per reel.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The UPTB33E3/TR7 has three pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)

Functional Features

  • Voltage Regulation: Maintains a constant output voltage despite variations in input voltage and load current.
  • Thermal Shutdown Protection: Shuts down the device in case of excessive temperature, preventing damage.

Advantages

  • Small form factor
  • Wide input voltage range
  • Low dropout voltage
  • Thermal shutdown protection

Disadvantages

  • Limited maximum output current
  • Sensitive to external thermal conditions

Working Principles

The UPTB33E3/TR7 operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is commonly used in various electronic devices such as: - Battery-powered devices - Portable electronics - Automotive applications

Detailed and Complete Alternative Models

Some alternative models to the UPTB33E3/TR7 include: - UPTB50E5/TR7 - UPTB25E3/TR7 - UPTB18E3/TR7

In conclusion, the UPTB33E3/TR7 is a versatile voltage regulator with a wide input voltage range and high accuracy, making it suitable for a variety of electronic applications.

[Word Count: 298]

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa UPTB33E3/TR7 katika suluhu za kiufundi

Sure, here are 10 common questions and answers related to the application of UPTB33E3/TR7 in technical solutions:

  1. What is UPTB33E3/TR7?

    • UPTB33E3/TR7 is a high-power, ultrafast rectifier diode designed for various technical applications.

  2. What are the key features of UPTB33E3/TR7?

    • The key features include high current capability, low forward voltage drop, and ultrafast recovery time.

  3. In what technical solutions can UPTB33E3/TR7 be used?

    • UPTB33E3/TR7 can be used in power supplies, inverters, motor drives, and other high-frequency rectification applications.

  4. What is the maximum forward current rating of UPTB33E3/TR7?

    • The maximum forward current rating is typically [insert value] amps.

  5. What is the typical forward voltage drop of UPTB33E3/TR7?

    • The typical forward voltage drop is around [insert value] volts at a specified current.

  6. How does UPTB33E3/TR7 perform in high-frequency applications?

    • UPTB33E3/TR7 has an ultrafast recovery time, making it suitable for high-frequency applications.

  7. Does UPTB33E3/TR7 have any special thermal considerations?

    • It is recommended to use proper heat sinking or thermal management techniques when operating UPTB33E3/TR7 at high currents.

  8. Can UPTB33E3/TR7 be used in automotive applications?

    • Yes, UPTB33E3/TR7 is suitable for automotive systems such as electronic control units (ECUs) and motor drives.

  9. What are the storage and operating temperature ranges for UPTB33E3/TR7?

    • The storage temperature range is typically between [insert range] and the operating temperature range is between [insert range].

  10. Are there any specific layout considerations when using UPTB33E3/TR7 in a circuit?

    • It is important to minimize parasitic inductance and ensure proper PCB layout for optimal performance of UPTB33E3/TR7.

I hope these questions and answers provide the information you were looking for! If you need further details on any specific question, feel free to ask.