The 74HCT273PW-Q100J belongs to the category of integrated circuits (ICs).
This IC is commonly used in digital electronics for storing and manipulating binary data.
The 74HCT273PW-Q100J is available in a standard 20-pin TSSOP package.
The essence of this product lies in its ability to store and process digital information efficiently and reliably.
The 74HCT273PW-Q100J is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The 74HCT273PW-Q100J has a total of 20 pins, each serving a specific function. The pin configuration is as follows:
The 74HCT273PW-Q100J is a D-type flip-flop with eight data inputs (D0-D7) and a clock pulse input (CP). It can store and latch the input data based on the rising edge of the clock signal. The clear input (CLR) allows for resetting the flip-flop to a known state.
The 74HCT273PW-Q100J operates based on the principles of sequential logic. When the clock pulse input (CP) transitions from low to high, the data inputs (D0-D7) are latched and stored in the flip-flop. The stored data remains unchanged until the next clock pulse transition occurs. The clear input (CLR) can be used to reset the flip-flop, clearing the stored data.
The 74HCT273PW-Q100J finds applications in various digital systems, including but not limited to: - Microcontrollers - Data storage devices - Communication systems - Automotive electronics - Industrial control systems
Some alternative models that offer similar functionality to the 74HCT273PW-Q100J include: - SN74HC273N - CD74HCT273E - MC74HCT273AN - 74LS273
These alternatives may differ in package type, voltage range, or other specifications, but they serve the same purpose of storing and manipulating digital data.
In conclusion, the 74HCT273PW-Q100J is a versatile integrated circuit with high-speed operation, low power consumption, and wide operating voltage range. Its ability to store and process digital information makes it suitable for various applications in different industries.
Sure! Here are 10 common questions and answers related to the application of 74HCT273PW-Q100J in technical solutions:
Q: What is the function of the 74HCT273PW-Q100J? A: The 74HCT273PW-Q100J is an octal D-type flip-flop with reset, which means it can store and manipulate digital data.
Q: What is the operating voltage range for the 74HCT273PW-Q100J? A: The 74HCT273PW-Q100J operates within a voltage range of 4.5V to 5.5V.
Q: How many flip-flops are there in the 74HCT273PW-Q100J? A: The 74HCT273PW-Q100J contains 8 flip-flops, making it an octal (8-bit) device.
Q: Can the 74HCT273PW-Q100J be used for edge-triggered or level-sensitive applications? A: Yes, the 74HCT273PW-Q100J can be used for both edge-triggered and level-sensitive applications.
Q: What is the maximum clock frequency supported by the 74HCT273PW-Q100J? A: The 74HCT273PW-Q100J can operate at a maximum clock frequency of 25 MHz.
Q: Does the 74HCT273PW-Q100J have an asynchronous reset input? A: Yes, the 74HCT273PW-Q100J has an asynchronous reset input that allows you to reset the flip-flops independently.
Q: Can the 74HCT273PW-Q100J be cascaded to increase the number of flip-flops? A: Yes, the 74HCT273PW-Q100J can be cascaded to increase the number of flip-flops and create larger registers.
Q: What is the power consumption of the 74HCT273PW-Q100J? A: The power consumption of the 74HCT273PW-Q100J is typically low, making it suitable for battery-powered applications.
Q: Does the 74HCT273PW-Q100J have Schmitt-trigger inputs? A: Yes, the 74HCT273PW-Q100J has Schmitt-trigger inputs, which provide hysteresis and improve noise immunity.
Q: Is the 74HCT273PW-Q100J compatible with other logic families? A: Yes, the 74HCT273PW-Q100J is compatible with both TTL and CMOS logic families, allowing for easy integration into existing systems.
Please note that these answers are general and may vary depending on the specific application and requirements.