ON Semiconductor
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
FXL2TD245L10X
Tazama Maelezo DataSheets

FXL2TD245L10X

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Transmission and Level Shifting
  • Characteristics: High-Speed, Low-Power Consumption
  • Package: 10-pin DFN (Dual Flat No-Lead)
  • Essence: Level Translator IC
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Data Rate: Up to 100 Mbps
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. GND: Ground
  2. A1: Input/Output Channel A1
  3. A2: Input/Output Channel A2
  4. B1: Input/Output Channel B1
  5. B2: Input/Output Channel B2
  6. OE: Output Enable
  7. VCC: Supply Voltage
  8. NC: No Connection
  9. NC: No Connection
  10. GND: Ground

Functional Features

  • Bidirectional Level Translation between Channels A and B
  • Automatic Direction Sensing
  • Supports Open-Drain and Push-Pull Configurations
  • Low Standby Current Consumption
  • ESD Protection on All Inputs and Outputs

Advantages

  • High-Speed Data Transmission
  • Wide Operating Voltage Range
  • Small Package Size for Space-Constrained Applications
  • Easy Integration into Existing Designs
  • Robust ESD Protection

Disadvantages

  • Limited Number of Channels (2 per direction)
  • Not Suitable for High-Voltage Applications
  • Requires External Pull-Up/Pull-Down Resistors for Proper Operation

Working Principles

The FXL2TD245L10X is a level translator IC designed to enable bidirectional communication between two different voltage domains. It automatically senses the direction of data flow and translates the logic levels accordingly. The device supports both open-drain and push-pull configurations, allowing flexibility in various applications. It operates at high speeds while consuming low power, making it suitable for battery-powered devices.

Detailed Application Field Plans

  • Industrial Automation: Interface between different voltage levels in control systems
  • Consumer Electronics: Level shifting in audio/video interfaces
  • Automotive: Communication between different subsystems with varying voltage levels
  • IoT Devices: Signal translation between sensors and microcontrollers

Detailed and Complete Alternative Models

  1. FXL4TD245L20X: 4-channel version with higher pin count
  2. FXL8TD245L40X: 8-channel version for more complex applications
  3. FXL2TD345L10X: Similar functionality with additional ESD protection features

Note: This is not an exhaustive list; please refer to the manufacturer's documentation for a complete list of alternative models.

Word Count: 411

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa FXL2TD245L10X katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of FXL2TD245L10X in technical solutions:

  1. Q: What is FXL2TD245L10X? A: FXL2TD245L10X is a specific model of a bidirectional level translator IC.

  2. Q: What is the voltage range supported by FXL2TD245L10X? A: FXL2TD245L10X supports voltage translation between 1.2V and 3.6V.

  3. Q: Can FXL2TD245L10X be used for both high-to-low and low-to-high voltage translation? A: Yes, FXL2TD245L10X is a bidirectional level translator, capable of translating signals in both directions.

  4. Q: What is the maximum data rate supported by FXL2TD245L10X? A: FXL2TD245L10X can support data rates up to 100 Mbps.

  5. Q: Is FXL2TD245L10X suitable for I2C communication? A: Yes, FXL2TD245L10X can be used for I2C communication as it supports bidirectional translation required for I2C.

  6. Q: Can FXL2TD245L10X handle multiple channels simultaneously? A: Yes, FXL2TD245L10X has 2 independent channels, allowing simultaneous translation on different signal lines.

  7. Q: Does FXL2TD245L10X require external power supply or voltage reference? A: Yes, FXL2TD245L10X requires an external power supply for operation.

  8. Q: What is the typical power consumption of FXL2TD245L10X? A: The typical power consumption of FXL2TD245L10X is around 1.5mW.

  9. Q: Can FXL2TD245L10X be used in automotive applications? A: Yes, FXL2TD245L10X is designed to meet the requirements of automotive applications.

  10. Q: Are there any specific layout considerations for using FXL2TD245L10X? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure optimal performance and signal integrity.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always advisable to refer to the manufacturer's datasheet and guidelines for accurate information.