ON Semiconductor
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
NCP1013ST100T3
Tazama Maelezo DataSheets

NCP1013ST100T3

Product Overview

Category

NCP1013ST100T3 belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is commonly used in various power supply designs, including offline flyback converters and low-power battery chargers.

Characteristics

  • Input voltage range: 85V to 265V AC
  • Output power capability: Up to 10W
  • Frequency range: 65kHz to 115kHz
  • Built-in protection features: Overload protection, overvoltage protection, and thermal shutdown
  • Compact package size: TO-220-5L
  • RoHS compliant

Package and Quantity

The NCP1013ST100T3 is available in a TO-220-5L package. It is typically sold in reels or tubes, with a quantity of 1,000 units per reel/tube.

Specifications

  • Supply Voltage Range: 8V to 30V
  • Operating Temperature Range: -40°C to +125°C
  • Maximum Duty Cycle: 72%
  • Standby Power Consumption: <50mW
  • Oscillator Frequency: 65kHz to 115kHz
  • Maximum Output Current: 400mA
  • Maximum Startup Current: 200µA

Pin Configuration

The NCP1013ST100T3 IC has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for regulating output voltage
  4. CS: Current sense input for controlling the switching frequency
  5. Drain: Switching transistor drain connection

Functional Features

  • Integrated high-voltage startup circuitry
  • Pulse frequency modulation (PFM) control for improved efficiency at light loads
  • Internal leading-edge blanking (LEB) for enhanced noise immunity
  • Built-in soft-start function to limit inrush current during startup
  • Auto-restart protection against output short circuit and open loop conditions

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for universal AC input compatibility
  • Compact package size enables space-saving designs
  • Integrated protection features enhance system reliability
  • PFM control improves efficiency at light loads, reducing power consumption

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Restricted duty cycle may limit the achievable output voltage range

Working Principles

The NCP1013ST100T3 operates as a fixed-frequency current-mode controller. It regulates the output voltage by adjusting the duty cycle of the internal power switch. The IC uses an integrated high-voltage startup circuit to power up the device from the rectified AC line voltage. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle accordingly to maintain a stable output.

Detailed Application Field Plans

The NCP1013ST100T3 is commonly used in various low-power applications, including: - Offline flyback converters for small appliances and consumer electronics - Low-power battery chargers for mobile devices and portable electronics - LED lighting drivers for residential and commercial applications - Auxiliary power supplies for industrial equipment and automation systems

Alternative Models

Here are some alternative models that offer similar functionality: - NCP1014ST100T3 - NCP1015ST100T3 - NCP1016ST100T3 - NCP1017ST100T3

These alternatives can be considered based on specific design requirements and availability.

Word count: 476 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa NCP1013ST100T3 katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of NCP1013ST100T3 in technical solutions:

  1. Q: What is NCP1013ST100T3? A: NCP1013ST100T3 is a high-performance integrated circuit (IC) designed for offline switch mode power supplies (SMPS) applications.

  2. Q: What are the key features of NCP1013ST100T3? A: Some key features include a fixed-frequency current-mode controller, internal startup timer, soft-start function, and built-in protection features like overvoltage and overcurrent protection.

  3. Q: What is the typical input voltage range for NCP1013ST100T3? A: The typical input voltage range is from 85V AC to 265V AC.

  4. Q: Can NCP1013ST100T3 be used in both buck and boost converter topologies? A: No, NCP1013ST100T3 is specifically designed for flyback converter topologies.

  5. Q: What is the maximum output power that can be achieved using NCP1013ST100T3? A: The maximum output power depends on the specific application and design considerations. It is recommended to refer to the datasheet and application notes for detailed information.

  6. Q: Does NCP1013ST100T3 require an external oscillator or clock source? A: No, NCP1013ST100T3 has an internal oscillator, so no external oscillator or clock source is required.

  7. Q: How does the soft-start function work in NCP1013ST100T3? A: The soft-start function gradually increases the duty cycle of the PWM signal during startup, reducing stress on the components and preventing excessive inrush current.

  8. Q: What are the typical applications of NCP1013ST100T3? A: NCP1013ST100T3 is commonly used in applications such as LED lighting, power adapters, battery chargers, and other low-power offline SMPS designs.

  9. Q: Does NCP1013ST100T3 have built-in protection features? A: Yes, NCP1013ST100T3 has built-in protection features like overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown.

  10. Q: Where can I find more information about the application of NCP1013ST100T3? A: You can refer to the datasheet, application notes, and technical resources provided by the manufacturer or consult with an experienced engineer for detailed application-specific information.

Please note that the answers provided here are general and may vary depending on the specific requirements and design considerations of your application.