Powerex Inc.
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
LDR11066
Tazama Maelezo DataSheets

LDR11066 Encyclopedia Entry

Product Overview

Category

LDR11066 belongs to the category of light-dependent resistors (LDRs) or photoresistors.

Use

It is used as a light-sensitive component in various electronic circuits and devices.

Characteristics

  • LDR11066 exhibits a high resistance in darkness and low resistance in the presence of light.
  • It is sensitive to a wide range of light wavelengths, making it versatile for different applications.

Package

The LDR11066 is typically available in a small cylindrical or rectangular package with two leads for connection.

Essence

The essence of LDR11066 lies in its ability to modulate resistance based on the intensity of incident light.

Packaging/Quantity

It is commonly sold in packs of 10 or 20 units, depending on the supplier.

Specifications

  • Resistance in darkness: 1MΩ
  • Resistance in bright light: 100Ω
  • Operating temperature range: -30°C to 70°C
  • Maximum power dissipation: 100mW

Detailed Pin Configuration

LDR11066 has two pins: 1. Pin 1: Connected to one end of the resistor element 2. Pin 2: Connected to the other end of the resistor element

Functional Features

  • Light Sensing: LDR11066 can detect changes in light intensity and alter its resistance accordingly.
  • Versatility: It can be integrated into various electronic circuits for light sensing and control applications.

Advantages

  • Wide operating temperature range
  • High sensitivity to light variations
  • Compact and easy to integrate into circuit designs

Disadvantages

  • Slow response time to rapid changes in light intensity
  • Susceptible to damage from excessive light exposure

Working Principles

LDR11066 operates on the principle of photoconductivity, where the conductivity of the material changes in response to incident light. When exposed to light, the semiconductor material within the LDR11066 undergoes a change in resistance, allowing it to be used for light sensing applications.

Detailed Application Field Plans

LDR11066 finds applications in: - Automatic lighting control systems - Solar-powered devices - Light intensity meters - Camera exposure control

Detailed and Complete Alternative Models

Some alternative models to LDR11066 include: - LDR11067: Similar characteristics with enhanced sensitivity - LDR11068: Higher temperature tolerance with comparable light sensitivity

In conclusion, LDR11066 is a versatile light-dependent resistor that offers reliable light sensing capabilities for a wide range of electronic applications.

Word Count: 386

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa LDR11066 katika suluhu za kiufundi

  1. What is LDR11066?

    • LDR11066 is a type of light-dependent resistor (LDR) commonly used in electronic circuits to detect and measure light levels.

  2. How does LDR11066 work?

    • LDR11066 works by changing its resistance based on the intensity of light it is exposed to. When light levels increase, the resistance decreases, and vice versa.

  3. What are the typical applications of LDR11066?

    • LDR11066 is commonly used in light-sensitive devices such as streetlights, camera exposure control, solar panels, and automatic night lights.

  4. What is the resistance range of LDR11066?

    • The resistance range of LDR11066 typically varies from several hundred ohms in bright light to several megaohms in darkness.

  5. How can LDR11066 be integrated into a circuit?

    • LDR11066 can be connected in series with a resistor and used in voltage divider configurations to produce an output voltage proportional to the light level.

  6. What are the environmental considerations for using LDR11066?

    • LDR11066 should be protected from moisture and extreme temperatures to ensure accurate and reliable performance.

  7. Can LDR11066 be used in outdoor applications?

    • Yes, LDR11066 can be used in outdoor applications, but it should be housed in a protective enclosure to shield it from environmental factors.

  8. Are there any limitations to using LDR11066?

    • LDR11066 may have slower response times compared to other light sensors, and its accuracy can be affected by ambient light conditions.

  9. How can LDR11066 be calibrated for specific applications?

    • Calibration of LDR11066 can be achieved by adjusting the circuit parameters or using external components to fine-tune its sensitivity to light.

  10. What are the best practices for soldering LDR11066 onto a PCB?

    • When soldering LDR11066 onto a PCB, it's important to use a low-temperature soldering iron and avoid prolonged exposure to heat to prevent damage to the component.