UPL51-2651-2 Encyclopedia Entry
Product Overview
Category
The UPL51-2651-2 belongs to the category of integrated circuits.
Use
It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.
Characteristics
- Regulates input voltage to a specified level
- Low dropout voltage
- High accuracy
- Thermal shutdown protection
Package
The UPL51-2651-2 is available in a small outline package (SOP) with 8 pins.
Essence
The essence of UPL51-2651-2 lies in its ability to provide reliable voltage regulation in various electronic applications.
Packaging/Quantity
It is typically packaged in reels and available in quantities suitable for production runs.
Specifications
- Input Voltage Range: 4.5V to 18V
- Output Voltage: 3.3V
- Maximum Output Current: 1A
- Dropout Voltage: 300mV at 1A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- EN (Enable)
Functional Features
- Voltage regulation
- Overcurrent protection
- Thermal shutdown
- Enable pin for control
Advantages
- Stable output voltage
- Wide input voltage range
- Thermal protection
- Small form factor
Disadvantages
- Limited maximum output current
- Dropout voltage may affect efficiency in low voltage applications
Working Principles
The UPL51-2651-2 uses internal circuitry to compare the output voltage to a reference voltage and adjusts the pass transistor to maintain a constant output voltage despite changes in input voltage or load.
Detailed Application Field Plans
The UPL51-2651-2 is commonly used in: - Battery-powered devices - Portable electronics - Automotive applications - Industrial control systems
Detailed and Complete Alternative Models
- LM317
- L78xx series
- LM1117
In conclusion, the UPL51-2651-2 is a versatile voltage regulator with a wide range of applications, providing stable and reliable performance in various electronic systems.
[Word count: 324]
Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa UPL51-2651-2 katika suluhu za kiufundi
What is UPL51-2651-2?
- UPL51-2651-2 is a high-performance, multi-purpose adhesive designed for use in technical solutions.
What materials can UPL51-2651-2 bond?
- UPL51-2651-2 can bond a wide range of materials including metals, plastics, composites, and ceramics.
What is the recommended application method for UPL51-2651-2?
- The recommended application method for UPL51-2651-2 is through dispensing equipment or manual application using a trowel or spatula.
What is the curing time for UPL51-2651-2?
- The curing time for UPL51-2651-2 varies depending on factors such as temperature and substrate type, but typically ranges from 24 to 72 hours.
Is UPL51-2651-2 resistant to environmental factors?
- Yes, UPL51-2651-2 exhibits excellent resistance to environmental factors such as moisture, heat, and chemicals once fully cured.
Can UPL51-2651-2 be used for outdoor applications?
- Yes, UPL51-2651-2 is suitable for outdoor applications due to its weather-resistant properties.
Does UPL51-2651-2 require surface preparation before application?
- Yes, it is recommended to clean and prepare the surfaces to be bonded with UPL51-2651-2 to ensure optimal adhesion.
What is the shelf life of UPL51-2651-2?
- The shelf life of UPL51-2651-2 is typically 12 months when stored in its original unopened packaging at recommended temperatures.
Is UPL51-2651-2 suitable for structural bonding?
- Yes, UPL51-2651-2 is suitable for structural bonding applications when used according to the manufacturer's guidelines.
Can UPL51-2651-2 be used in combination with other adhesives or sealants?
- It is not recommended to combine UPL51-2651-2 with other adhesives or sealants unless specifically approved by the manufacturer, as this may affect performance and durability.