STMicroelectronics
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
M24256-DFMN6TP
Tazama Maelezo DataSheets

M24256-DFMN6TP

Product Overview

Category

The M24256-DFMN6TP belongs to the category of non-volatile memory integrated circuits.

Use

It is used for storing and retrieving digital information in various electronic devices.

Characteristics

  • Non-volatile: Retains stored data even when power is removed
  • High storage capacity
  • Fast read and write speeds
  • Low power consumption

Package

The M24256-DFMN6TP is typically available in a small surface-mount package.

Essence

This product is essential for enabling data storage and retrieval in electronic systems.

Packaging/Quantity

The M24256-DFMN6TP is commonly packaged in reels with varying quantities, catering to different production needs.

Specifications

  • Storage Capacity: 256 Kbit
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Data Retention: Minimum 200 years

Detailed Pin Configuration

The M24256-DFMN6TP features a standard pin configuration with specific pins designated for power, data input/output, and control signals.

Functional Features

  • Efficient data storage and retrieval
  • Compatibility with I2C interface
  • Low power consumption
  • Robust data retention capabilities

Advantages and Disadvantages

Advantages

  • High storage capacity
  • Low power consumption
  • Long-term data retention
  • Compact form factor

Disadvantages

  • Relatively slower write speeds compared to some alternatives
  • Limited compatibility with certain interfaces

Working Principles

The M24256-DFMN6TP utilizes electrically erasable programmable read-only memory (EEPROM) technology to store and retrieve digital data. When powered, it allows for the reading and writing of data through the I2C interface, providing non-volatile storage capabilities.

Detailed Application Field Plans

The M24256-DFMN6TP finds extensive use in various applications, including: - Consumer electronics - Automotive systems - Industrial automation - Medical devices - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to the M24256-DFMN6TP include: - AT24C256 - CAT24C256 - 24AA256

In conclusion, the M24256-DFMN6TP serves as a reliable non-volatile memory solution with high storage capacity, low power consumption, and robust data retention capabilities. Its application spans across diverse industries, making it an integral component in modern electronic systems.

[Word Count: 366]

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa M24256-DFMN6TP katika suluhu za kiufundi

  1. What is M24256-DFMN6TP?

    • M24256-DFMN6TP is a 256-Kbit serial I2C bus EEPROM with a wide voltage operating range and low power consumption, commonly used for storing configuration data in various technical solutions.

  2. What are the key features of M24256-DFMN6TP?

    • The key features include a 256-Kbit (32 Kbyte) memory array, a wide voltage range from 1.7V to 5.5V, and an I2C serial interface.

  3. How is M24256-DFMN6TP typically used in technical solutions?

    • M24256-DFMN6TP is often used for storing configuration settings, calibration data, or other non-volatile parameters in embedded systems, industrial equipment, automotive applications, and consumer electronics.

  4. What are the advantages of using M24256-DFMN6TP in technical solutions?

    • Some advantages include its low power consumption, small form factor, ease of integration with microcontrollers, and reliable non-volatile storage capabilities.

  5. What are the typical operating conditions for M24256-DFMN6TP?

    • The typical operating conditions include a temperature range of -40°C to 85°C, a clock frequency of up to 1 MHz, and a write cycle time of 5 ms.

  6. How do I interface with M24256-DFMN6TP in my design?

    • M24256-DFMN6TP uses the I2C serial interface, so you would need to connect it to the SDA (data) and SCL (clock) lines of your microcontroller or system.

  7. Are there any specific considerations for PCB layout when using M24256-DFMN6TP?

    • It's important to ensure proper decoupling capacitors, signal integrity, and adequate trace routing to minimize noise and ensure reliable communication with the device.

  8. Can M24256-DFMN6TP be used in automotive applications?

    • Yes, M24256-DFMN6TP is suitable for automotive applications due to its wide voltage range and robust operating conditions.

  9. What are the typical power consumption characteristics of M24256-DFMN6TP?

    • The typical standby current is very low, typically in the range of microamps, making it well-suited for battery-powered devices.

  10. Are there any known issues or limitations when using M24256-DFMN6TP in technical solutions?

    • While M24256-DFMN6TP is a reliable and widely used EEPROM, it's important to follow the manufacturer's guidelines for proper handling, storage, and usage to ensure optimal performance and longevity.