The M95080-WDW6TP has a standard SOIC-8 pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VSS | Ground | | 2 | SDA | Serial Data | | 3 | SCL | Serial Clock| | 4 | WP | Write Protect| | 5 | VCC | Power Supply| | 6 | NC | No Connection| | 7 | NC | No Connection| | 8 | NC | No Connection|
The M95080-WDW6TP is a non-volatile memory device that uses an I2C interface for communication. It stores and retrieves data using electrically erasable programmable read-only memory (EEPROM) technology. The device operates by sending commands and data through the SDA (Serial Data) and SCL (Serial Clock) pins. It supports both byte and page write modes, allowing flexible data storage options.
The M95080-WDW6TP is widely used in various applications, including but not limited to:
These alternative models offer different memory capacities to suit specific application requirements while maintaining similar characteristics and pin configurations.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of M95080-WDW6TP in technical solutions:
Q: What is M95080-WDW6TP? A: M95080-WDW6TP is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by STMicroelectronics.
Q: What is the storage capacity of M95080-WDW6TP? A: M95080-WDW6TP has a storage capacity of 8 kilobits, which is equivalent to 1024 bytes or 8192 bits.
Q: What is the operating voltage range for M95080-WDW6TP? A: The operating voltage range for M95080-WDW6TP is typically between 1.8V and 5.5V.
Q: What is the maximum clock frequency supported by M95080-WDW6TP? A: M95080-WDW6TP supports a maximum clock frequency of 5 MHz.
Q: Can M95080-WDW6TP be used for storing program code? A: No, M95080-WDW6TP is primarily designed for storing non-volatile data such as configuration settings, calibration data, or small amounts of user data.
Q: Is M95080-WDW6TP compatible with I2C communication protocol? A: Yes, M95080-WDW6TP uses the I2C (Inter-Integrated Circuit) communication protocol for interfacing with microcontrollers or other devices.
Q: Does M95080-WDW6TP support hardware write protection? A: Yes, M95080-WDW6TP provides hardware write protection through a dedicated pin (WP) that can be controlled to prevent accidental or unauthorized writes.
Q: What is the typical endurance of M95080-WDW6TP? A: M95080-WDW6TP has a typical endurance of 4 million write cycles, meaning it can be written to approximately 4 million times before potential failure.
Q: Can M95080-WDW6TP operate in harsh environments? A: Yes, M95080-WDW6TP is designed to operate in a wide temperature range (-40°C to +85°C) and is resistant to environmental factors such as humidity and vibrations.
Q: Are there any specific application examples for M95080-WDW6TP? A: M95080-WDW6TP is commonly used in various applications, including automotive electronics, industrial control systems, medical devices, consumer electronics, and more, where non-volatile data storage is required.
Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.