STMicroelectronics
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
VIPER53SP13TR
Tazama Maelezo DataSheets

VIPER53SP13TR

Product Overview

  • Category: Power Management IC
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low standby power consumption
  • Package: TO-220
  • Essence: Integrated Switching Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 8V to 30V
  • Output Voltage: Adjustable from 1.235V to 28V
  • Output Current: Up to 3A
  • Switching Frequency: 60kHz to 200kHz
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The VIPER53SP13TR has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for current limit protection
  6. EN: Enable pin for turning on/off the regulator
  7. VIN: Input voltage pin
  8. SW: Switching node pin for connecting the inductor

Functional Features

  • Integrated high-voltage startup
  • Overvoltage and overcurrent protection
  • Thermal shutdown protection
  • Soft-start function for controlled startup
  • Frequency jittering for reduced EMI emissions
  • Auto-restart feature for fault recovery

Advantages and Disadvantages

Advantages: - High efficiency conversion - Low standby power consumption - Wide input voltage range - Comprehensive protection features - Compact TO-220 package

Disadvantages: - Limited output current capacity (up to 3A) - Relatively high switching frequency

Working Principles

The VIPER53SP13TR is a voltage regulator based on a flyback topology. It operates by converting the input voltage to a high-frequency AC signal, which is then rectified and filtered to provide a stable DC output voltage. The integrated high-voltage startup circuit ensures reliable operation even at low input voltages. The device incorporates various protection mechanisms to safeguard against overvoltage, overcurrent, and thermal issues.

Detailed Application Field Plans

The VIPER53SP13TR is commonly used in various applications, including:

  1. Power supplies for consumer electronics
  2. Industrial automation systems
  3. LED lighting drivers
  4. Battery chargers
  5. Automotive electronics

Alternative Models

  • VIPER53E
  • VIPER53SP
  • VIPER53SP13-E

These alternative models offer similar functionality and can be considered as replacements for the VIPER53SP13TR.

In conclusion, the VIPER53SP13TR is a power management IC that serves as a voltage regulator with high efficiency and low standby power consumption. Its compact TO-220 package, comprehensive protection features, and wide input voltage range make it suitable for various applications in consumer electronics, industrial automation, LED lighting, battery chargers, and automotive electronics.

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa VIPER53SP13TR katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of VIPER53SP13TR in technical solutions:

  1. Q: What is VIPER53SP13TR? A: VIPER53SP13TR is a high-voltage converter IC designed for offline power supplies, commonly used in various technical solutions.

  2. Q: What are the key features of VIPER53SP13TR? A: VIPER53SP13TR features include a wide input voltage range, integrated power MOSFET, high efficiency, and comprehensive protection features.

  3. Q: What is the typical application of VIPER53SP13TR? A: VIPER53SP13TR is typically used in applications such as power adapters, chargers, LED lighting, and industrial power supplies.

  4. Q: What is the maximum input voltage supported by VIPER53SP13TR? A: VIPER53SP13TR supports a maximum input voltage of up to XX volts (please refer to the datasheet for the exact value).

  5. Q: Can VIPER53SP13TR operate in a wide temperature range? A: Yes, VIPER53SP13TR is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  6. Q: Does VIPER53SP13TR have built-in protection features? A: Yes, VIPER53SP13TR includes various protection features like overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: What is the efficiency of VIPER53SP13TR? A: VIPER53SP13TR offers high efficiency, typically above XX% (please refer to the datasheet for the exact value).

  8. Q: Can VIPER53SP13TR be used in both AC and DC applications? A: No, VIPER53SP13TR is specifically designed for AC input applications and may not be suitable for DC input.

  9. Q: What is the output power range supported by VIPER53SP13TR? A: VIPER53SP13TR supports an output power range of XX watts to XX watts (please refer to the datasheet for the exact values).

  10. Q: Are there any reference designs available for VIPER53SP13TR? A: Yes, the manufacturer provides reference designs and application notes that can help in implementing VIPER53SP13TR in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of VIPER53SP13TR.