Texas Instruments
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
CD4076BMG4
Tazama Maelezo DataSheets

CD4076BMG4

Product Overview

Category

CD4076BMG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital logic applications.

Characteristics

  • CD4076BMG4 is a quad bilateral switch.
  • It operates at a wide voltage range, typically between 3V and 18V.
  • The device offers low ON-state resistance and high OFF-state resistance.
  • It has a high noise immunity and a low power consumption.

Package

CD4076BMG4 is available in a standard 14-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of CD4076BMG4 lies in its ability to control the flow of signals in digital circuits.

Packaging/Quantity

This product is typically sold in reels containing a quantity of 2500 units per reel.

Specifications

  • Supply Voltage Range: 3V to 18V
  • ON-State Resistance: 100 ohms (typical)
  • OFF-State Resistance: 10^12 ohms (typical)
  • Maximum Operating Frequency: 5 MHz
  • Input Capacitance: 5 pF (typical)
  • Output Capacitance: 10 pF (typical)

Detailed Pin Configuration

  1. Pin 1: Control Input A
  2. Pin 2: Control Input B
  3. Pin 3: Control Input C
  4. Pin 4: Control Input D
  5. Pin 5: Ground (GND)
  6. Pin 6: Switch Output Y1
  7. Pin 7: Switch Output Y2
  8. Pin 8: Switch Output Y3
  9. Pin 9: Switch Output Y4
  10. Pin 10: VDD (Positive Power Supply)
  11. Pin 11: Control Input E
  12. Pin 12: Control Input F
  13. Pin 13: Control Input G
  14. Pin 14: Control Input H

Functional Features

  • CD4076BMG4 is a quad bilateral switch that allows the control of signal flow in digital circuits.
  • It provides four independent switches, each controlled by its respective control input.
  • The device offers low ON-state resistance, enabling efficient signal transmission.
  • It has high OFF-state resistance, ensuring minimal signal leakage when the switch is turned off.
  • CD4076BMG4 exhibits a high noise immunity, making it suitable for applications with noisy environments.
  • The low power consumption of this IC contributes to energy-efficient designs.

Advantages and Disadvantages

Advantages

  • Wide voltage range operation
  • Low ON-state resistance
  • High OFF-state resistance
  • High noise immunity
  • Low power consumption

Disadvantages

  • Limited maximum operating frequency (5 MHz)
  • Relatively small input and output capacitance

Working Principles

CD4076BMG4 operates based on the principle of a bilateral switch. When the control input is activated, the switch connects the corresponding input to the output, allowing the signal to pass through. Conversely, when the control input is deactivated, the switch disconnects the input from the output, preventing the signal from flowing.

Detailed Application Field Plans

CD4076BMG4 finds applications in various digital logic circuits, including but not limited to: - Multiplexers - Data selectors - Signal routing systems - Analog switches - Audio and video signal processing

Detailed and Complete Alternative Models

Some alternative models similar to CD4076BMG4 are: - CD4066BMG4: Quad bilateral switch with similar characteristics and pin configuration. - CD4053BMG4: Triple bilateral switch with similar characteristics and pin configuration. - CD4016BMG4: Quad bilateral switch with slightly different characteristics and pin configuration.

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 511 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa CD4076BMG4 katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of CD4076BMG4 in technical solutions:

  1. Q: What is CD4076BMG4? A: CD4076BMG4 is a CMOS quad bilateral switch IC that can be used for signal routing and switching applications.

  2. Q: What is the operating voltage range of CD4076BMG4? A: The operating voltage range of CD4076BMG4 is typically between 3V and 18V.

  3. Q: Can CD4076BMG4 handle analog signals? A: Yes, CD4076BMG4 can handle both analog and digital signals.

  4. Q: How many switches are there in CD4076BMG4? A: CD4076BMG4 has four independent switches, allowing for multiple signal routing options.

  5. Q: What is the maximum current rating of CD4076BMG4? A: The maximum current rating of CD4076BMG4 is typically around 100mA per switch.

  6. Q: Can CD4076BMG4 be used for audio applications? A: Yes, CD4076BMG4 can be used for audio applications such as audio signal routing or audio switching.

  7. Q: Does CD4076BMG4 have built-in protection features? A: No, CD4076BMG4 does not have built-in protection features. External protection circuitry may be required depending on the application.

  8. Q: What is the typical ON resistance of CD4076BMG4? A: The typical ON resistance of CD4076BMG4 is around 300 ohms.

  9. Q: Can CD4076BMG4 be used in low-power applications? A: Yes, CD4076BMG4 is designed to operate at low power and can be used in low-power applications.

  10. Q: What is the package type of CD4076BMG4? A: CD4076BMG4 is available in a standard 14-pin SOIC (Small Outline Integrated Circuit) package.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.