Texas Instruments
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
LM27964SQ-I/NOPB
Tazama Maelezo DataSheets

LM27964SQ-I/NOPB

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC for LED Backlighting Applications

Characteristics: - High efficiency - Wide input voltage range - Adjustable output current - Dimming control - Overvoltage and overtemperature protection

Package: 20-pin WQFN package

Essence: LM27964SQ-I/NOPB is a power management IC specifically designed for LED backlighting applications. It provides efficient power conversion and control for driving LED strings in various display devices.

Packaging/Quantity: The LM27964SQ-I/NOPB is available in a 20-pin WQFN package. The quantity per reel is typically 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Current Range: Up to 1.2A
  • Switching Frequency: 1MHz
  • Dimming Control: PWM or Analog
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The LM27964SQ-I/NOPB has the following pin configuration:

  1. VIN: Input voltage
  2. EN: Enable pin
  3. FB: Feedback pin
  4. DIM: Dimming control input
  5. GND: Ground
  6. SW: Switch node connection
  7. LX: Inductor connection
  8. VOUT: Output voltage
  9. PGND: Power ground
  10. AGND: Analog ground
  11. NC: No connect
  12. NC: No connect
  13. NC: No connect
  14. NC: No connect
  15. NC: No connect
  16. NC: No connect
  17. NC: No connect
  18. NC: No connect
  19. NC: No connect
  20. NC: No connect

Functional Features

  • High efficiency power conversion
  • Wide input voltage range for versatile applications
  • Adjustable output current for precise LED brightness control
  • Dimming control options (PWM or analog) for flexible backlight adjustment
  • Overvoltage and overtemperature protection for enhanced reliability

Advantages and Disadvantages

Advantages: - High efficiency results in energy savings - Wide input voltage range allows compatibility with various power sources - Adjustable output current enables precise control of LED brightness - Dimming control options provide flexibility in backlight adjustment - Overvoltage and overtemperature protection enhance system reliability

Disadvantages: - Limited to LED backlighting applications - Requires additional external components for operation

Working Principles

The LM27964SQ-I/NOPB operates by converting the input voltage to a regulated output voltage suitable for driving LED strings. It utilizes a high-frequency switching regulator to efficiently control the LED current. The dimming control input allows for adjusting the LED brightness using either a PWM signal or an analog voltage.

Detailed Application Field Plans

The LM27964SQ-I/NOPB is commonly used in various display devices that require LED backlighting, such as: - LCD monitors - Televisions - Automotive infotainment systems - Industrial displays - Medical equipment displays

Detailed and Complete Alternative Models

  1. LM27963SQ-I/NOPB: Similar to LM27964SQ-I/NOPB but with a lower output current capability.
  2. LM27965SQ-I/NOPB: Similar to LM27964SQ-I/NOPB but with a higher output current capability.
  3. LM27966SQ-I/NOPB: Similar to LM27964SQ-I/NOPB but with additional features like fault detection and reporting.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa LM27964SQ-I/NOPB katika suluhu za kiufundi

  1. What is the input voltage range of LM27964SQ-I/NOPB?
    - The input voltage range of LM27964SQ-I/NOPB is 2.7V to 5.5V.

  2. What is the output current capability of LM27964SQ-I/NOPB?
    - LM27964SQ-I/NOPB has an output current capability of up to 500mA.

  3. Can LM27964SQ-I/NOPB be used in battery-powered applications?
    - Yes, LM27964SQ-I/NOPB is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  4. What is the typical efficiency of LM27964SQ-I/NOPB?
    - The typical efficiency of LM27964SQ-I/NOPB is around 90% at full load.

  5. Does LM27964SQ-I/NOPB have built-in overcurrent protection?
    - Yes, LM27964SQ-I/NOPB features built-in overcurrent protection to safeguard the device and the load.

  6. Can LM27964SQ-I/NOPB operate in a wide temperature range?
    - Yes, LM27964SQ-I/NOPB is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  7. Is LM27964SQ-I/NOPB suitable for automotive applications?
    - Yes, LM27964SQ-I/NOPB is AEC-Q100 qualified, making it suitable for automotive applications.

  8. What type of package does LM27964SQ-I/NOPB come in?
    - LM27964SQ-I/NOPB is available in a small 10-pin WSON package for space-constrained applications.

  9. Can LM27964SQ-I/NOPB be used in industrial control systems?
    - Yes, LM27964SQ-I/NOPB is well-suited for industrial control systems due to its robust design and wide input voltage range.

  10. Does LM27964SQ-I/NOPB require external compensation components?
    - No, LM27964SQ-I/NOPB features internal compensation, eliminating the need for external compensation components.