Texas Instruments
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
UC2708DWTR
Tazama Maelezo DataSheets

UC2708DWTR

Introduction

The UC2708DWTR is a versatile integrated circuit belonging to the category of voltage mode PWM controllers. This device is commonly used in power supply applications and offers various characteristics, packaging options, and functional features that make it suitable for a wide range of applications.

Basic Information Overview

  • Category: Voltage Mode PWM Controller
  • Use: Power supply applications
  • Characteristics: High efficiency, adjustable frequency, overcurrent protection
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Regulating and controlling power supply output
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 15V
  • Output Voltage: Adjustable
  • Operating Temperature: -40°C to 85°C
  • Frequency Range: 100kHz to 1MHz
  • Current Limit: Adjustable

Detailed Pin Configuration

The UC2708DWTR features a standard pin configuration with pins designated for input voltage, ground, feedback, error amplifier, oscillator, and output drive. The detailed pinout is as follows: 1. VCC 2. Error Amp Inverting Input 3. Error Amp Non-Inverting Input 4. Feedback Input 5. Oscillator Timing Capacitor 6. Oscillator Timing Resistor 7. Output Drive 8. Ground

Functional Features

  • Adjustable Frequency: Allows flexibility in power supply design
  • Overcurrent Protection: Safeguards against excessive current draw
  • Soft Start: Prevents abrupt voltage changes during startup

Advantages and Disadvantages

Advantages

  • Flexibility in frequency adjustment
  • Efficient power regulation
  • Overcurrent protection enhances system reliability

Disadvantages

  • Limited operating temperature range
  • Requires external components for full functionality

Working Principles

The UC2708DWTR operates on the principle of voltage mode control, where the output voltage is compared to a reference voltage and the resulting error signal is used to adjust the duty cycle of the PWM signal, regulating the output voltage.

Detailed Application Field Plans

The UC2708DWTR finds extensive use in various power supply applications, including but not limited to: - Switched-mode power supplies - DC-DC converters - Battery charging systems

Detailed and Complete Alternative Models

  • UC3842: Offers similar functionality with extended operating temperature range
  • LM5039: Provides enhanced overcurrent protection features

In conclusion, the UC2708DWTR is a reliable voltage mode PWM controller with a range of features and specifications that make it well-suited for diverse power supply applications.

Word Count: 386

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa UC2708DWTR katika suluhu za kiufundi

  1. What is UC2708DWTR?

    • UC2708DWTR is a dual-channel, high-speed, low-side gate driver IC designed for driving power MOSFETs and IGBTs in various applications.

  2. What is the maximum operating voltage of UC2708DWTR?

    • The maximum operating voltage of UC2708DWTR is typically 18V.

  3. What is the maximum output current capability of UC2708DWTR?

    • UC2708DWTR can typically drive up to 4A peak output current per channel.

  4. What are the typical applications of UC2708DWTR?

    • Typical applications include motor drives, power supplies, DC-DC converters, and Class D amplifiers.

  5. Does UC2708DWTR have built-in protection features?

    • Yes, UC2708DWTR includes undervoltage lockout (UVLO), overcurrent protection, and thermal shutdown features for robust operation.

  6. What is the input logic compatibility of UC2708DWTR?

    • UC2708DWTR is compatible with both TTL and CMOS logic levels.

  7. What is the recommended operating temperature range for UC2708DWTR?

    • The recommended operating temperature range is typically -40°C to 125°C.

  8. Can UC2708DWTR be used in automotive applications?

    • Yes, UC2708DWTR is suitable for automotive applications due to its wide operating temperature range and robust design.

  9. Does UC2708DWTR support PWM input signals?

    • Yes, UC2708DWTR supports pulse-width modulation (PWM) input signals for precise control of the output.

  10. Is there a reference design available for using UC2708DWTR in a specific application?

    • Yes, Texas Instruments provides reference designs and application notes for utilizing UC2708DWTR in various technical solutions.