Torex Semiconductor Ltd
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
XC6108C36BGR-G
Tazama Maelezo DataSheets

XC6108C36BGR-G

Product Overview

Category

XC6108C36BGR-G belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capabilities
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6108C36BGR-G is available in a small surface-mount package, which makes it suitable for use in compact electronic devices.

Essence

The essence of XC6108C36BGR-G lies in its ability to regulate voltage levels efficiently and reliably.

Packaging/Quantity

XC6108C36BGR-G is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.6V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C36BGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: XC6108C36BGR-G ensures a stable output voltage of 3.6V regardless of input voltage fluctuations.
  • Overcurrent Protection: It incorporates overcurrent protection to safeguard the connected circuitry.
  • Low Power Consumption: The quiescent current of only 1μA ensures minimal power loss during operation.
  • Thermal Shutdown: In case of excessive temperature, the device automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact size for space-constrained applications
  • Low power consumption
  • Overcurrent protection

Disadvantages

  • Limited maximum output current (150mA)
  • Dropout voltage of 200mV may affect performance in low input voltage scenarios

Working Principles

XC6108C36BGR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6108C36BGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108C36BGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa XC6108C36BGR-G katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of XC6108C36BGR-G in technical solutions:

  1. Q: What is XC6108C36BGR-G? A: XC6108C36BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108C36BGR-G? A: The operating voltage range of XC6108C36BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C36BGR-G work? A: XC6108C36BGR-G continuously monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold.

  4. Q: What is the output type of XC6108C36BGR-G? A: XC6108C36BGR-G has an open-drain output, which means it can be connected to other devices with a pull-up resistor.

  5. Q: Can XC6108C36BGR-G be used in battery-powered applications? A: Yes, XC6108C36BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: What is the typical reset threshold voltage of XC6108C36BGR-G? A: The typical reset threshold voltage of XC6108C36BGR-G is 3.6V.

  7. Q: Is XC6108C36BGR-G suitable for automotive applications? A: Yes, XC6108C36BGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Q: Can XC6108C36BGR-G be used in industrial control systems? A: Yes, XC6108C36BGR-G can be used in industrial control systems as it has a wide operating temperature range of -40°C to +105°C.

  9. Q: Does XC6108C36BGR-G have any built-in protection features? A: Yes, XC6108C36BGR-G has built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  10. Q: What is the package type of XC6108C36BGR-G? A: XC6108C36BGR-G is available in a small SOT-23-5 package, which is commonly used in compact electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.