XC6108N45AGR-G belongs to the category of voltage regulators.
It is primarily used for voltage regulation in electronic circuits.
XC6108N45AGR-G is available in a SOT-25 package. It is typically sold in reels containing a specified quantity of units.
The XC6108N45AGR-G has the following pin configuration:
```
| | --|----|-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: VOUT (Output Voltage)
XC6108N45AGR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage based on the difference between the input and desired output voltage. It operates by maintaining a constant voltage drop across the pass transistor, ensuring a stable output voltage.
XC6108N45AGR-G finds applications in various electronic devices and systems, including: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment - IoT devices
Some alternative models that offer similar functionality to XC6108N45AGR-G include: - XC6208N45AGR-G - XC6308N45AGR-G - XC6408N45AGR-G - XC6508N45AGR-G
These models have comparable specifications and pin configurations, providing flexibility in design choices.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of XC6108N45AGR-G in technical solutions:
1. What is XC6108N45AGR-G? - XC6108N45AGR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.
2. What is the operating voltage range of XC6108N45AGR-G? - The operating voltage range of XC6108N45AGR-G is from 0.9V to 10.0V.
3. What is the typical reset threshold voltage of XC6108N45AGR-G? - The typical reset threshold voltage of XC6108N45AGR-G is 4.5V.
4. How does XC6108N45AGR-G work? - XC6108N45AGR-G continuously monitors the input voltage. When the voltage drops below the reset threshold, it generates a reset signal that can be used to reset microcontrollers or other digital circuits.
5. What is the output type of XC6108N45AGR-G? - XC6108N45AGR-G has an open-drain output type.
6. What is the maximum supply current of XC6108N45AGR-G? - The maximum supply current of XC6108N45AGR-G is 1.0µA.
7. Can XC6108N45AGR-G be used in battery-powered applications? - Yes, XC6108N45AGR-G is suitable for battery-powered applications due to its low supply current and wide operating voltage range.
8. Does XC6108N45AGR-G have built-in hysteresis? - Yes, XC6108N45AGR-G has built-in hysteresis to prevent oscillation caused by noise or voltage fluctuations near the threshold voltage.
9. What is the package type of XC6108N45AGR-G? - XC6108N45AGR-G is available in a SOT-25 package.
10. Can XC6108N45AGR-G be used in automotive applications? - Yes, XC6108N45AGR-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring and reset functionality.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.