Torex Semiconductor Ltd
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
XC6119C45ANR-G
Tazama Maelezo DataSheets

XC6119C45ANR-G

Product Overview

Category

XC6119C45ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6119C45ANR-G is available in a small surface mount package, which makes it suitable for compact electronic devices.

Essence

The essence of XC6119C45ANR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.5V ± 1%
  • Maximum Output Current: 100mA
  • Quiescent Current: 30μA (typical)
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119C45ANR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6119C45ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: This IC includes built-in protection against excessive current flow, safeguarding the connected circuitry.
  • Low quiescent current: The device consumes minimal current when not actively regulating voltage, contributing to energy efficiency.
  • Fast response time: XC6119C45ANR-G quickly adjusts the output voltage in response to changes in the input voltage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide operating temperature range enables usage in various environmental conditions.
  • Overcurrent protection ensures the safety of connected components.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

XC6119C45ANR-G operates based on a feedback control mechanism. It continuously monitors the output voltage and adjusts its internal circuitry to maintain a stable output within the specified range. By comparing the actual output voltage with a reference voltage, the IC regulates the flow of current to ensure consistent voltage levels.

Detailed Application Field Plans

XC6119C45ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6119C45ANR-G are: - XC6120C12ANR-G - XC6131C24ANR-G - XC6142C36ANR-G - XC6153C48ANR-G

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 437 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa XC6119C45ANR-G katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of XC6119C45ANR-G in technical solutions:

  1. Q: What is XC6119C45ANR-G? A: XC6119C45ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6119C45ANR-G? A: The operating voltage range of XC6119C45ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119C45ANR-G help in technical solutions? A: XC6119C45ANR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.

  4. Q: What is the output type of XC6119C45ANR-G? A: XC6119C45ANR-G has an open-drain output, which means it can be connected to other devices or circuits for further processing.

  5. Q: Can XC6119C45ANR-G be used in battery-powered applications? A: Yes, XC6119C45ANR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: What is the accuracy of the voltage detection in XC6119C45ANR-G? A: The accuracy of voltage detection in XC6119C45ANR-G is typically ±1.5%.

  7. Q: Does XC6119C45ANR-G have built-in hysteresis? A: Yes, XC6119C45ANR-G has built-in hysteresis of typically 100mV, which helps to prevent oscillation or false triggering near the threshold voltage.

  8. Q: Can XC6119C45ANR-G be used in automotive applications? A: Yes, XC6119C45ANR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Q: What is the temperature range of operation for XC6119C45ANR-G? A: XC6119C45ANR-G can operate within a temperature range of -40°C to +105°C.

  10. Q: Is XC6119C45ANR-G available in different package options? A: Yes, XC6119C45ANR-G is available in various package options, including SOT-23 and USP-4B.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for XC6119C45ANR-G.