Torex Semiconductor Ltd
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
XC6122D745MR-G
Tazama Maelezo DataSheets

XC6122D745MR-G

Product Overview

Category

XC6122D745MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6122D745MR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: It prevents overheating by shutting down the device when the temperature exceeds a certain threshold.

Package

XC6122D745MR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6122D745MR-G lies in its ability to regulate and maintain a constant voltage level, ensuring reliable operation of electronic devices.

Packaging/Quantity

XC6122D745MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.3V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6122D745MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6122D745MR-G maintains a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It limits the current flow to protect the circuit from damage.
  • Thermal shutdown protection: The device shuts down when the temperature exceeds a certain threshold, preventing overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low dropout voltage ensures efficient operation even with low input voltages.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

XC6122D745MR-G utilizes internal circuitry to compare the output voltage with a reference voltage. It adjusts the resistance within the regulator to maintain a constant output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6122D745MR-G finds application in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D745MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6122D745MR-G is a voltage regulator that provides stable output voltage, low dropout voltage, and various protection features. Its compact size and wide range of applications make it a popular choice in the electronics industry.

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa XC6122D745MR-G katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of XC6122D745MR-G in technical solutions:

  1. Question: What is XC6122D745MR-G?
    - Answer: XC6122D745MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122D745MR-G?
    - Answer: The operating voltage range of XC6122D745MR-G is from 0.65V to 6.0V.

  3. Question: How does XC6122D745MR-G work?
    - Answer: XC6122D745MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below the reference voltage, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the typical quiescent current consumption of XC6122D745MR-G?
    - Answer: The typical quiescent current consumption of XC6122D745MR-G is very low, usually around 1.0μA.

  5. Question: Can XC6122D745MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122D745MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  6. Question: What is the output configuration of XC6122D745MR-G?
    - Answer: XC6122D745MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic high level when the output is not active.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122D745MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122D745MR-G is typically ±1.5%.

  8. Question: Can XC6122D745MR-G be used for overvoltage protection?
    - Answer: No, XC6122D745MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of operation for XC6122D745MR-G?
    - Answer: XC6122D745MR-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6122D745MR-G RoHS compliant?
    - Answer: Yes, XC6122D745MR-G is RoHS (Restriction of Hazardous Substances) compliant, which means it meets the environmental standards set by the European Union.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.