Torex Semiconductor Ltd
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
XC6123E444ER-G
Tazama Maelezo DataSheets

XC6123E444ER-G

Product Overview

Category

XC6123E444ER-G belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency

Package

XC6123E444ER-G comes in a small surface-mount package.

Essence

The essence of XC6123E444ER-G lies in its ability to regulate voltage and manage power efficiently in electronic circuits.

Packaging/Quantity

XC6123E444ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123E444ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

XC6123E444ER-G offers the following functional features:

  • Voltage regulation: It ensures a stable output voltage within the specified range.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Enable pin: The optional enable pin allows for control of the device's operation.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • High efficiency results in reduced power loss.
  • Wide input and output voltage ranges provide flexibility in various circuit designs.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

XC6123E444ER-G operates based on a voltage regulation principle. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage fluctuations.

Detailed Application Field Plans

XC6123E444ER-G finds applications in various electronic devices, including but not limited to:

  1. Mobile phones: Power management for battery charging circuits.
  2. Portable audio players: Voltage regulation for audio amplifiers.
  3. Wearable devices: Power management for sensors and communication modules.
  4. IoT devices: Voltage regulation for microcontrollers and wireless connectivity modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123E444ER-G are:

  1. XC6206P332MR-G
  2. XC6220B332MR-G
  3. XC6219B332MR-G
  4. XC6221B332MR-G

These models have comparable specifications and can be considered as alternatives depending on specific requirements.

Word count: 410 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa XC6123E444ER-G katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of XC6123E444ER-G in technical solutions:

  1. Question: What is XC6123E444ER-G?
    - Answer: XC6123E444ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6123E444ER-G?
    - Answer: The operating voltage range of XC6123E444ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123E444ER-G work?
    - Answer: XC6123E444ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the status of the power supply.

  4. Question: What is the output type of XC6123E444ER-G?
    - Answer: XC6123E444ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the typical quiescent current consumption of XC6123E444ER-G?
    - Answer: The typical quiescent current consumption of XC6123E444ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6123E444ER-G be used for undervoltage and overvoltage detection?
    - Answer: Yes, XC6123E444ER-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Question: What is the accuracy of XC6123E444ER-G?
    - Answer: The accuracy of XC6123E444ER-G is typically ±1.5% at room temperature.

  8. Question: Can XC6123E444ER-G be used in automotive applications?
    - Answer: Yes, XC6123E444ER-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: What is the package type of XC6123E444ER-G?
    - Answer: XC6123E444ER-G is available in a small SOT-23-5 package, which is commonly used for surface mount applications.

  10. Question: Are there any application notes or reference designs available for XC6123E444ER-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6123E444ER-G on their official website, which can help users understand its usage in different technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.