Torex Semiconductor Ltd
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
XC6123F620MR-G
Tazama Maelezo DataSheets

XC6123F620MR-G

Product Overview

Category

XC6123F620MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123F620MR-G is available in a small surface-mount package.

Essence

The essence of XC6123F620MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

XC6123F620MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123F620MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6123F620MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
  • Thermal shutdown protection: In case of excessive heat, XC6123F620MR-G shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it suitable for various applications.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Single fixed output voltage restricts flexibility in certain designs.

Working Principles

XC6123F620MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6123F620MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123F620MR-G are: - XC6123F620ML-G: Similar specifications but with a different package type (leadless) - XC6123F620NR-G: Higher output current (500mA) but with a larger package size - XC6123F620PR-G: Lower dropout voltage (100mV) but with a higher quiescent current

Note: The above alternative models are just examples and there may be other options available from different manufacturers.

Word count: 408 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa XC6123F620MR-G katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of XC6123F620MR-G in technical solutions:

  1. Question: What is XC6123F620MR-G?
    - Answer: XC6123F620MR-G is a voltage detector IC (integrated circuit) that provides accurate monitoring of power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6123F620MR-G?
    - Answer: The operating voltage range of XC6123F620MR-G is from 0.7V to 6.0V.

  3. Question: What is the output type of XC6123F620MR-G?
    - Answer: XC6123F620MR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  4. Question: What is the typical quiescent current consumption of XC6123F620MR-G?
    - Answer: The typical quiescent current consumption of XC6123F620MR-G is very low, usually around 1.0µA.

  5. Question: Can XC6123F620MR-G detect both overvoltage and undervoltage conditions?
    - Answer: Yes, XC6123F620MR-G can detect both overvoltage and undervoltage conditions, making it suitable for various power supply monitoring applications.

  6. Question: What is the accuracy of XC6123F620MR-G in voltage detection?
    - Answer: XC6123F620MR-G has a high accuracy of ±1.0% in voltage detection, ensuring reliable monitoring of power supply voltages.

  7. Question: Does XC6123F620MR-G have built-in hysteresis?
    - Answer: Yes, XC6123F620MR-G has built-in hysteresis, which helps to prevent false triggering and ensures stable voltage detection.

  8. Question: Can XC6123F620MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123F620MR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  9. Question: What is the temperature range of XC6123F620MR-G?
    - Answer: XC6123F620MR-G has a wide temperature range of -40°C to +85°C, making it suitable for various environmental conditions.

  10. Question: Is XC6123F620MR-G available in a small package?
    - Answer: Yes, XC6123F620MR-G is available in a compact SOT-25 package, which makes it easy to integrate into space-constrained designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.