Torex Semiconductor Ltd
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
XC6124D736MR-G
Tazama Maelezo DataSheets

XC6124D736MR-G

Product Overview

Category

XC6124D736MR-G belongs to the category of voltage regulators.

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Package Type: SOT-25
  • Operating Temperature Range: -40°C to +85°C

Package and Quantity

XC6124D736MR-G is available in a SOT-25 package. It is typically sold in reels containing a specified quantity of units.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Load Regulation: ±0.5% (typical)
  • Line Regulation: ±0.3% (typical)
  • Ripple Rejection Ratio: 70dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124D736MR-G has the following pin configuration:

```

| | --|----|-- VIN --|----|-- VOUT --|____|-- GND ```

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • High ripple rejection ratio
  • Overcurrent protection
  • Thermal shutdown protection

Advantages

  • Wide input voltage range
  • Small package size
  • Low dropout voltage ensures efficient power conversion
  • Overcurrent and thermal shutdown protection enhance reliability

Disadvantages

  • Limited maximum output current (200mA)
  • SOT-25 package may not be suitable for all applications requiring higher power dissipation

Working Principles

The XC6124D736MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a stable output voltage.

Detailed Application Field Plans

XC6124D736MR-G can be used in various applications, including: 1. Battery-powered devices 2. Portable electronic devices 3. IoT devices 4. Consumer electronics 5. Industrial equipment

Detailed Alternative Models

Some alternative models to XC6124D736MR-G include: 1. XC6124C736MR-G 2. XC6124D736NR-G 3. XC6124E736MR-G 4. XC6124F736MR-G 5. XC6124G736MR-G

These models offer similar functionality but may have slight differences in specifications or package types.

Word count: 334 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa XC6124D736MR-G katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of XC6124D736MR-G in technical solutions:

  1. Question: What is XC6124D736MR-G?
    - Answer: XC6124D736MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124D736MR-G?
    - Answer: The operating voltage range of XC6124D736MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124D736MR-G?
    - Answer: XC6124D736MR-G has an open-drain output type, which means it can be connected to other devices or circuits with different voltage levels.

  4. Question: What is the typical quiescent current consumption of XC6124D736MR-G?
    - Answer: The typical quiescent current consumption of XC6124D736MR-G is very low, typically around 1.0µA.

  5. Question: How does XC6124D736MR-G detect voltage levels?
    - Answer: XC6124D736MR-G uses an internal voltage reference to compare the input voltage with a preset threshold. When the input voltage falls below the threshold, the output of the IC becomes active.

  6. Question: Can XC6124D736MR-G be used for undervoltage detection?
    - Answer: Yes, XC6124D736MR-G is commonly used for undervoltage detection. It can trigger an alert or shutdown sequence when the input voltage drops below a certain level.

  7. Question: What is the hysteresis feature of XC6124D736MR-G?
    - Answer: XC6124D736MR-G has a built-in hysteresis feature, which helps to prevent output oscillation near the threshold voltage. It ensures stable operation even in noisy environments.

  8. Question: What is the maximum operating temperature range of XC6124D736MR-G?
    - Answer: The maximum operating temperature range of XC6124D736MR-G is from -40°C to +85°C.

  9. Question: Can XC6124D736MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124D736MR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  10. Question: Are there any application notes or reference designs available for XC6124D736MR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6124D736MR-G on their official website. These resources can help in understanding the best practices for using this IC in various technical solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.