Vishay Semiconductor Diodes Division
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
VLZ5V1C-GS08
Tazama Maelezo DataSheets

VLZ5V1C-GS08

Introduction

The VLZ5V1C-GS08 belongs to the category of voltage regulators and is commonly used in electronic devices to stabilize the voltage supply. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing voltage supply in electronic devices
  • Characteristics: Efficient, reliable, compact
  • Package: SOT-23
  • Essence: Regulating voltage to a constant level
  • Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The VLZ5V1C-GS08 typically has three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite fluctuations in the input voltage
  • Low Dropout: Operates with minimal dropout voltage, ensuring efficient use of available power
  • Low Quiescent Current: Consumes minimal current when in standby mode, conserving energy

Advantages and Disadvantages

Advantages

  • Compact size
  • Wide input voltage range
  • Low dropout voltage
  • Low quiescent current

Disadvantages

  • Limited output current capacity
  • Sensitive to input voltage spikes

Working Principles

The VLZ5V1C-GS08 utilizes a feedback control mechanism to compare the output voltage to a reference voltage and adjust the pass device to maintain a constant output voltage. This ensures that the connected load receives a stable voltage regardless of variations in the input supply.

Detailed Application Field Plans

The VLZ5V1C-GS08 is commonly used in portable electronic devices, battery-powered systems, and low-power applications where maintaining a stable voltage supply is critical. It is suitable for use in handheld consumer electronics, IoT devices, and sensor modules.

Detailed and Complete Alternative Models

  • LM2937: Offers higher output current capacity
  • XC6206: Provides lower quiescent current for ultra-low power applications
  • MCP1700: Suitable for extended temperature range applications

In conclusion, the VLZ5V1C-GS08 voltage regulator offers efficient and reliable voltage stabilization in a compact package, making it well-suited for various electronic applications.

[Word count: 421]

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa VLZ5V1C-GS08 katika suluhu za kiufundi

  1. What is the VLZ5V1C-GS08?

    • The VLZ5V1C-GS08 is a voltage level shifter designed to convert signals between different voltage levels in technical solutions.

  2. What voltage levels can the VLZ5V1C-GS08 handle?

    • The VLZ5V1C-GS08 can handle voltage levels ranging from 1.2V to 5.5V, making it suitable for a wide range of applications.

  3. What are the typical applications of the VLZ5V1C-GS08?

    • Typical applications of the VLZ5V1C-GS08 include level shifting in I2C, SMBus, and other digital communication protocols, as well as interfacing between different voltage domains in mixed-voltage systems.

  4. How does the VLZ5V1C-GS08 ensure signal integrity during level shifting?

    • The VLZ5V1C-GS08 uses a proprietary circuit design to minimize signal distortion and maintain signal integrity during voltage level shifting.

  5. What is the maximum data rate supported by the VLZ5V1C-GS08?

    • The VLZ5V1C-GS08 supports high-speed data rates up to 400 kHz, making it suitable for fast communication interfaces.

  6. Can the VLZ5V1C-GS08 be used in battery-powered devices?

    • Yes, the VLZ5V1C-GS08 has low power consumption and can be used in battery-powered devices without significantly impacting battery life.

  7. Is the VLZ5V1C-GS08 compatible with standard logic families?

    • Yes, the VLZ5V1C-GS08 is compatible with a wide range of standard logic families, including TTL, CMOS, and LVCMOS.

  8. Does the VLZ5V1C-GS08 require external components for operation?

    • The VLZ5V1C-GS08 requires minimal external components, simplifying its integration into technical solutions.

  9. What is the operating temperature range of the VLZ5V1C-GS08?

    • The VLZ5V1C-GS08 is designed to operate over a wide temperature range, typically from -40°C to 125°C, ensuring reliability in various environments.

  10. Are there any application notes or reference designs available for the VLZ5V1C-GS08?

    • Yes, application notes and reference designs are available to assist engineers in implementing the VLZ5V1C-GS08 in their technical solutions.