Vishay Siliconix
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
DG202BAK-E3
Tazama Maelezo DataSheets

DG202BAK-E3

Product Overview

Category

DG202BAK-E3 belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for signal switching and routing purposes.

Characteristics

  • High reliability
  • Low power consumption
  • Compact size
  • Wide operating temperature range

Package

DG202BAK-E3 is available in a small surface mount package, making it suitable for compact circuit designs.

Essence

The essence of DG202BAK-E3 lies in its ability to efficiently switch and route signals within electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of DG202BAK-E3 units.

Specifications

  • Supply Voltage: 2.5V - 16V
  • On-Resistance: 10Ω (typical)
  • Off-Resistance: 10MΩ (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Power Dissipation: 500mW

Detailed Pin Configuration

DG202BAK-E3 has a total of 16 pins, which are configured as follows:

  1. Pin 1: Input/Output 1
  2. Pin 2: Input/Output 2
  3. Pin 3: Input/Output 3
  4. Pin 4: Input/Output 4
  5. Pin 5: Ground
  6. Pin 6: Input/Output 5
  7. Pin 7: Input/Output 6
  8. Pin 8: Input/Output 7
  9. Pin 9: Input/Output 8
  10. Pin 10: VCC
  11. Pin 11: Enable
  12. Pin 12: NC (No Connection)
  13. Pin 13: NC (No Connection)
  14. Pin 14: NC (No Connection)
  15. Pin 15: NC (No Connection)
  16. Pin 16: NC (No Connection)

Functional Features

  • High-speed signal switching
  • Low power consumption
  • Wide operating voltage range
  • Built-in protection against electrostatic discharge (ESD)

Advantages and Disadvantages

Advantages

  • Reliable performance
  • Compact size for space-constrained designs
  • Low power consumption
  • Wide operating temperature range

Disadvantages

  • Limited number of input/output channels
  • Higher cost compared to some alternative models

Working Principles

DG202BAK-E3 operates based on solid-state switching principles. When the enable pin is activated, the internal circuitry routes the input signals to the corresponding output pins. The on-resistance of the switch is minimized to ensure minimal signal distortion.

Detailed Application Field Plans

DG202BAK-E3 finds applications in various electronic systems, including but not limited to: - Audio/video equipment - Telecommunications devices - Industrial control systems - Test and measurement instruments - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to DG202BAK-E3 are: - DG201ABK-E3 - DG203BAK-E3 - DG204BAK-E3 - DG205BAK-E3 - DG206BAK-E3

These models offer similar functionality and can be used interchangeably depending on specific requirements.

Word count: 334 words

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa DG202BAK-E3 katika suluhu za kiufundi

Sure! Here are 10 common questions and answers related to the application of DG202BAK-E3 in technical solutions:

  1. Q: What is DG202BAK-E3? A: DG202BAK-E3 is a specific model of a quad SPST analog switch IC.

  2. Q: What are the key features of DG202BAK-E3? A: The key features of DG202BAK-E3 include low on-resistance, low power consumption, wide voltage range, and high ESD protection.

  3. Q: What is the typical application of DG202BAK-E3? A: DG202BAK-E3 is commonly used in various applications such as audio and video signal routing, data acquisition systems, instrumentation, and communication equipment.

  4. Q: What is the maximum voltage rating for DG202BAK-E3? A: The maximum voltage rating for DG202BAK-E3 is typically around ±22V.

  5. Q: Can DG202BAK-E3 handle both analog and digital signals? A: Yes, DG202BAK-E3 can handle both analog and digital signals effectively.

  6. Q: What is the operating temperature range for DG202BAK-E3? A: The operating temperature range for DG202BAK-E3 is usually between -40°C to +85°C.

  7. Q: Does DG202BAK-E3 require an external power supply? A: No, DG202BAK-E3 does not require an external power supply as it operates using the voltage supplied by the system.

  8. Q: Can DG202BAK-E3 be used in battery-powered devices? A: Yes, DG202BAK-E3 can be used in battery-powered devices due to its low power consumption.

  9. Q: What is the typical on-resistance of DG202BAK-E3? A: The typical on-resistance of DG202BAK-E3 is around 50 ohms.

  10. Q: Is DG202BAK-E3 RoHS compliant? A: Yes, DG202BAK-E3 is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for DG202BAK-E3.