Vishay Siliconix
Picha inaweza kuwa uwakilishi.
Angalia vipimo kwa maelezo ya bidhaa.
SI4896DY-T1-GE3
Tazama Maelezo DataSheets

SI4896DY-T1-GE3

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, converters, and motor control
Characteristics: High efficiency, low on-resistance, fast switching speed
Package: D-PAK (TO-252)
Essence: Power management
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Voltage Rating: 30V
  • Continuous Drain Current: 11A
  • RDS(ON): 9.5mΩ
  • Gate Threshold Voltage: 1.5V
  • Power Dissipation: 2.5W

Detailed Pin Configuration

The SI4896DY-T1-GE3 has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low on-resistance for high efficiency
  • Fast switching speed for improved performance
  • Suitable for a wide range of power management applications

Advantages

  • High efficiency
  • Low on-resistance
  • Fast switching speed

Disadvantages

  • Not suitable for high voltage applications
  • Limited continuous drain current compared to some alternatives

Working Principles

The SI4896DY-T1-GE3 operates based on the principles of field-effect transistors, utilizing the gate voltage to control the flow of current between the drain and source terminals.

Detailed Application Field Plans

This MOSFET is commonly used in various power management applications such as: - DC-DC converters - Motor control circuits - Power supplies

Detailed and Complete Alternative Models

  1. SI4896DY-T1-E3: Similar specifications with different packaging
  2. IRF4905PBF: Higher voltage rating and continuous drain current
  3. NTMFS4C06N: Lower on-resistance and higher power dissipation

Note: The alternative models listed above are for reference purposes and may require additional evaluation based on specific application requirements.

This completes the English editing encyclopedia entry structure for SI4896DY-T1-GE3.

Orodhesha maswali na majibu 10 ya kawaida yanayohusiana na utumiaji wa SI4896DY-T1-GE3 katika suluhu za kiufundi

  1. What is the maximum operating temperature of SI4896DY-T1-GE3?

    • The maximum operating temperature of SI4896DY-T1-GE3 is typically 150°C.

  2. What is the input voltage range for SI4896DY-T1-GE3?

    • The input voltage range for SI4896DY-T1-GE3 is typically between 4.5V and 60V.

  3. What is the typical output current capability of SI4896DY-T1-GE3?

    • The typical output current capability of SI4896DY-T1-GE3 is up to 5A.

  4. Does SI4896DY-T1-GE3 have built-in overcurrent protection?

    • Yes, SI4896DY-T1-GE3 features built-in overcurrent protection to safeguard the circuit.

  5. What is the typical switching frequency of SI4896DY-T1-GE3?

    • The typical switching frequency of SI4896DY-T1-GE3 is around 500kHz.

  6. Is SI4896DY-T1-GE3 suitable for automotive applications?

    • Yes, SI4896DY-T1-GE3 is designed to meet the requirements for automotive applications.

  7. Does SI4896DY-T1-GE3 require an external heat sink for thermal management?

    • Depending on the application and power dissipation, an external heat sink may be required for optimal thermal management.

  8. Can SI4896DY-T1-GE3 be used in a step-down converter configuration?

    • Yes, SI4896DY-T1-GE3 can be used in a step-down (buck) converter configuration.

  9. What is the typical efficiency of SI4896DY-T1-GE3?

    • The typical efficiency of SI4896DY-T1-GE3 is around 90% under normal operating conditions.

  10. Are there any specific layout considerations when using SI4896DY-T1-GE3 in a PCB design?

    • It is recommended to follow the layout guidelines provided in the datasheet to optimize performance and minimize EMI issues.